Hi guys, bought a fireblade 2000 from ebay its missing a few bits, can find a body and undertray, but can't find a gear cover anyone point me towards one( schumacher UK don't have one.) Will post pics when it arrives, cheers all.
I don't think there's anyone making repro gear covers for the Fireblades, or any other Schumacher for that matter. Your best bet it just to keep an eye out on ebay, they will turn up eventually
You might almost be better off seeing if a Losi RPM gear cover would work, or any other manufacturer for that matter. You might have to drill and tap a couple of new holes in the motor plate but that would be better than no gear cover at all. Unless it's for a shelfer, in that case new is best but very hard to come by...
What are the options for gear covers on the t2's? I am currently using a cover for the Thunder Tiger Phoenix XT but it really doesn't fit very well and the plastic is cheap and wants to split. I really would like to find a rpm cover for the t2 and I...
Last post
Try playing with the b4 moulded cover. It doesn't fit, but the top hole is okay, and for the bottom hole there might be enough meat in the motor plate to be re-drilled.
I am currently playing about with a very lightened MMS car, and have stumbled across a really thick, ribbed gear cover I have not seen previously. It came with a rare Demon Dart bodyshell and one person (Jamie Booth) has suggested he thinks this...
Last post
Latest update comes from Ian Diboll who informed me that Nick Adams did indeed have a gear cover made through his contacts at WASP Racing. Still not got 100% confirmation that this is the one however.
I had 2 brand new stock ones, that I had picked up at the LHS. One for the runner and and for the shelf car. Well today, my runner took one good tumble and the gear cover split. Never had that happen until now. My question is, what is everyone else...
Last post
check out racer8838 on ebay he has some clear lexan covers for the rc10 gold tubs. I have purchased a few and they are already to go no trimming just have drill or ream the screw holes.
So after looking on several sites, it seems like most gear covers for the rc10 t4 / b4 / sc10 can work on each other. I've also seen that while only using 1 screw, you can still mount a b4 gear cover on the old rc10.
My question now is why couldnt...
Last post
just a few more notes. It doesnt have very much clearance for a thick slipper. I dont think anything beyond the basic b4 slipper will fit. The 6 gear and stealth ones do fit but there is very little free room.
This has probably been done before but I thought it might be interesting.
Home Depot screw cover, some poster putty and a smudge of yellow paint.
I never did like the servo tape cover and I don't have a lathe to machine a cover.
I think it looks...
Does anyone know where I can buy a rpm gear cover like this one, that will fit the original rc10 motor plate? I know they made them because I hve one. I'd like to find 3 more for my other cars. The lexan ones are kinda flimsey. Thanks, Bud
Last post
The one I have I got on a rc10t I bought on ebay. Lhs is mostly planes and a few car parts. Not much help there. I guess I'll just have to keep watching for one on ebay. If I hit the mother lode, I'll let you know. :)
