Hello. I have not been here for a few years. I have a futaba fasst 3pm transmitter. Will the 6 channel receivers bind with it or do I have to buy the 4 channel receivers? They are hard to find but ebay has lots of 6 channels. The Futaba charts all just show the 4 channels (maybe 3) as compatible. Thanks.
I have this Radio does anybody know if any other 2.4GHz recivers will work with it? it came with a Futaba R603FF 3-Channel 2.4GHz FASST Rx but their almost a 100 bucks a pop. I didnt think about that when I bought it. but people want about the same...
I'm thinking to upgrade and replace my +20 year old Futaba 1024 radio, and get me a Futaba 4GRS 2.4Ghz. With a new radio you need (at least I do :mrgreen:) a handful of extra receivers to your runners. Futaba receivers cost around $70-80, which...
Last post
I found a 2 channel Futaba receiver FPR202GF that cost under $40. The thing is I have only found the receiver at the Swedish importer MiniCars and nothing at Futabarc.com. Well, I don't think the Swedish importer MiniCars is unique, there must be...
I recently picked up a nice little Hitec Shredder RCD 75mhz AM receiver, however it's marked AIR so I presume it's tuned for Airtronics. There's no real wiring markings on it and I have no 75mhz AM Airtronics radio. Is there any way to test this...
Last post
That Dynamite MicroPro has old style Airtronics servo sockets, so it should need a Airtronics crystal.
I have two, Futaba and Airtronics versions. The manual says to use crystals that match the transmitter.
Futaba used to offer these two spec lists for their older discontinued receivers and servos. Now they're only available through the Internet Archives site. That's a bit of a pain. So I decided to edit them a bit, and post them here for easier...
Last post
I see that R142JE is called out in the manual. Somehow I muat have gotten confused about the 152 superseding the 142. Thanks for the measurements.
20 does sound like a good starting point. Just making sure 23 isn't more common.
Hi All,
I havent driven RC cars since about the early nineties when I was racing my RC10 CE at an indoor track in Colorado Springs. I recently picked up a worlds car rerelease I've have been driving the heck out of it and having a great time....
Last post
the tires that come on the Tamiya dt02 buggies, like the sand viper, are hard spikes/no insert. they work well on grass and ungroomed surfaces.
To sum up the post below. I used a duratrax rattle can to paint with and it was horrible. Tamiya color cans are gone at my LHS. What can I use in place since i dont want to make the jump to an airbrush system yet.
So with tamiya color paint no...
Last post
Just bought some Spaz Stix paints. FL Yellow, FL Blue, and White. We'll see. I have only used the Tamiya and Pactra paints in the past. With the RTR and pre- painted bodies, who in the hell needs a quality paint anymore? Right? Wuuf. I'll report...
DS for drag racing only what would you guys run up front 5,10,15,20,25 or 30*, I got some 5’s and it pitches the castor blocks something fierce towards the (correction) FRONT of the car not sure this is what I want?
Any recommendations would be...
Last post
I am anxious to see how this build turns out. Please keep the updates coming. :)
