I'm sure this has been discussed before. What's the best way to get your old white plastic parts looking new again or at least better? I was thinking about a 90% water 10% bleach soak. Is this a bad idea? Also will putting the parts in semi boiling...
Last post
Thanks for the info on Super Clean. I went looking for some today, didn't find it. So I was going to get some Simple Green instead when I passed by the Soft Scrub products and found this....
Has anyone any good tips on how to get original white parts clean and white again? Acetone and Bleach don't work! :shock:
Cheers,
G
Last post
i've used castrol super clean and had decent results getting parts clean, but once that white plastic gets that yellowish stain to it, its pretty much impossible to get WHITE again. i've tried bleach, softscrub, boiling them in bleach... nothing...
Hello All! I have seen many messages about trying to whiten parts but I want input on how to preserve them. I don't know if it is best to leave them in the plastic or boxes or if the plastic leads to yellowing? I figure that sunlight is bad and of...
Last post
Sometimes the parts yellow under the best conditions. I've never used Aerospace 303 as UV protection, but it looks very interesting. At my job, there are a few standard practices we use when storing all our plastics. In addition to sunlight, keep...
Really annoyed with myself! Got a CE a recently, stripped it down in work and cleaned the parts with the detergeant i use as a wetting agent for my industrial washer. I have always used this stuff over the past few years as it cleans the parts well...
Last post
I think so. Here's an example:
Baby oil is also mineral oil, but it usually has a flowery scent added to it. So if you want your parts to smell good, use baby oil :D .
In any case, mineral oil is clear, so it won't stain, and it won't harm the...
Can regular rattle can auto or hobby spray paint be used to paint parts like the headlight backs silver? Or do you need water based paints?
I got a set of Jelly bean wheels that came to me painted silver that appears to be painted with rattle can...
Last post
I don't know if you've painted them yet, but I wanted to chime in with my 2 cents ...
... firstly, if you are set on painting the wheels, I would recommend soaking them in brake fluid first (which may actually remove the paint), or at least...
HI!... Just wondering what the best way to whiten up vintage RC-10 white plastic parts is? Seen a ton of different ways, but would like to know what has worked the best for you guys. I don't want to make the parts brittle.
Thanks for any info you...
Last post
HI!... Thanks for the link. I'm new to the site and the RC-10. I tried the search function and that particular thread never showed up. :?