RC10Talk - The Net's Largest Vintage R/C Community

Hey guys. I'm starting my restoration on my 870c i got off ebay many years ago, after receiving I placed on the shelf with my other Yokomos. Only got my hobby room back after a leaking pipe in the wall flooded the room, so I thought it was about time to start it. IMG_20231216_172700_1.jpg Will try a...

Hi i'm getting corrosion on my Yokomo shelve queens magnesium parts, what could be doing this as they have been in cabinets for years & only just noticed the other day the corrosion. Any help with stopping this would be appreciated.

My parts haul.

Hey EvolutionRevolution thanks, think it came out well. :D The Cross C-hubs look good, had to put a spacer in (you can just see blue spacer in photo) to much slop with out it. I used the 0 deg c-hubs think they do a 5 deg ones as well & i had to linish the corners of the c-hubs i little to make ...

Well finshed off yokomo for now just some photos of her.
Got some CROSS RACING c-hubs & bearings for them, had to linish them just a bit to make them fit in the arms.
Hope you like.

Gday bully yeah love my dattos have 8 of them. :D Havent raced in over 10 years but been thinking of starting up again, was racing off road in Rockingham when the club was there & raced interclubs with my Losi's then YZ10, then raced at Bayswater onroad at the track there with my pancar RC10ls(o...

EvolutionRevolution I did'nt know there were two different motor mounts, yeah i have the harded hinge pin set new & a set came with one of my cars (the thing is the harded set would not fit in the Fastrax front arms had to use the black ones on the other car), this is the only black shaft i have...

Just found these in the box i got my car in, part numbers for some of the Fastrax millennium bits.

Yeah measured the carbon parts & you're right about the upper deck. Chassis 2.5mm Upper deck 1.5mm & 2.0mm Link plate 1.5mm Rear sup arms 2.0mm Diff mount plate 3.0mm I measured the 3 cars i have & found 2 upper decks at 1.5mm & one at 2.0mm. Why do you think that is? Maybe there sup...

You'll notice that you can't use the Team Suzuki c-hubs and Fasttrax Millenium alloy arms together, unless you modify the arms. The c-hubs will work with the original arms if you shave a bit of material off the arms. Yeah you are right EvolutionRevolution they don't work even the Team Suzuki are do...

Really enjoying myself building this car.
Im on the look out for 90mm titanium turnbuckles, if anyone has any ideas were i might find some could you please PM.
That's all folks.

Very beautiful indeed!
Love the paint job.

Just somemore of what i've done.
All titamium screw set & aluminum parts (apart from the pivot balls in the 4 pivot sockets & screws that hold them together), was really lucky to find the long screws in titamium in my box of parts.

Well here are some photo's of what i've done it's not much but found some time to start. Took the donor car apart & played around with the steering linkage, found some noce blue alloy ball ends & spacers i think look cool. Some alloy parts i got with the car came with these kingpins(on left ...

Thanks EvolutionRevolution yeah have not got that far in fact not started build, waiting on some parts. I have the Team Suzuki arms as well so i take it they will not work with c-hubs, if not will use the c-hubs on my YZ10 build. Will start soon on build with photos, really looking forward to it, :D...