RC10Talk - The Net's Largest Vintage R/C Community

#8 is the size and 32 threads per inch is the pitch. An 8-32 tap is the correct specification.

For anyone curious. I did one block using a drill bit as out lined and was unhappy with the fit, though it did fit and work. I tried a 10mm reamer next. I will confirm using a 10mm reamer on steering block will not work. It removes too much material from the rear of the carrier to seat the metric b...

Charlie don't surf wrote: ↑Thu Oct 17, 2024 4:05 pm Using the standard B6 (non 3.5mm hd) turnbuckles and cups? All clearance good on them, was wondering about the steering and inner front camber links

3.5mm 48mm turnbuckles
HD ballstud lengths needed in photos
91722 ballcups
91477 M3 plain nuts

Clearance perfect

No going back now. I do need to get the correct 8/32 countersink...if you know, you know- Screenshot_20241020_192319_Gallery.jpg Began to mod for a fan opening, have to be way more creative to get proper fan placement with good flow. Still need to make the carbon mount. Screenshot_20241020_192242_Ga...

From my experience, the 6903 5/8" bearing always had the ptfe seal since the original stealth trans came out. The 6906 were all metal shielded up to and including the t2/b2. Then the running changed happened for first run b3/t3 were they were all ptfe sealed. When associated released the FT b3/...

After that interesting ebay situation (well, it's not actually over yet) I found this rc10 on offerup. It was fairly cheap in rc10 terms, and looks to be a mashup of a bunch of different parts. Should make a nice runner that I dont have to care too much about and that's really what I want in an rc10.

Anyone see this?

Does anyone have experience with using a DC power source (like a car battery) and a LiPo battery charger? My little Tenergy TB6B didn't like it's 12v input being hooked to a 12v input source. It looks like I disconnected it before I cooked it and left the magic smoke out, but it's going to be an AC ...

Work benches are pricey unfortunately. Sometimes you can go the home stores in the area and find drop or reject countertops Formica or other wood based. They make great bench tops, or you can buy a sheet of 3/4" plywood and rip it into two sheets that you stack for a solid table top. A few 2x4s...

Does anyone have experience with using a DC power source (like a car battery) and a LiPo battery charger? My little Tenergy TB6B didn't like it's 12v input being hooked to a 12v input source. It looks like I disconnected it before I cooked it and left the magic smoke out, but it's going to be an AC...

If you don't want it, you could put it in the Buy Sell Trade section. I would see if you like this one or the other one better. Maybe make a best buggy for you to keep from the 2 buggies. Or you have a spare parts buggy now (or at least a spare parts front end). Or you could try to return it to the ...

Just saw this today. Yuck

If you pause the video just after the clear car you can see the chrome wheels and green nose plate.

JosephS wrote: ↑Tue Nov 05, 2024 3:04 pm There is now enough RC10 stuff around that people can get weird with it again. Chrome wheels, dyed plastics, cut down pieces and crazy paint.

B6 gearbox internals retrofits, 4wd kits, trailing arms ... bring on the weird stuff!!!

Hello all, So glad I found this community since I have all old RC car/trucks. It's nice to see others sharing the same interest of vintage chassis and builds. I'm in Culver City, CA and the nitro scene is mostly gone in the area. So sad
Kenny