RC10Talk - The Net's Largest Vintage R/C Community

Really pleased , very hard to photograph as it's a clear resin .

Tried an FDM print , it's in polycarbonate, not nearly as detailed reproduction but not bat , it's got exhaust pipes , ,carburettors and pulleys , I have a distributor designed but not printed yet . I need to move the mounting for it as it sits just a bit too low , easy to do . 20230515_213822.jpg 2...

On the Big Bear, everything is set for the bodyshell. Left over are the masking and the paintjob.... I'm quite clear on what it will look like, and it won't be boxart... There is 3 days left (and in practice that really means 2 evennings and one day) before the packing and departure for the first v...

Getting there with the engine , I'll post a few pictures of the previous model on the car but this version has the fan housing , is moved 2.5mm back and 2mm up , it still will protrude out the back too far but if i went with real life dimensions half the engine would be gone including the fan housin...

Doing what I think us the final engine print , moved it in another two mm from the one shown here , also now it has working head and tail lights courtesy of Silvertripple , thanks Mark .

Finally happy with the placement and design of the engine , i need to reprint the exhausts as the support moved so the pipes look funky.

New brain pan and a lick of paint . Rather pleased with how it's going . 20230520_201026.jpg 20230520_201015.jpg 20230520_200953.jpg 20230520_200946.jpg Since Shaggy quit Mysrery Incorperated and no longer has to do all the running from ghosts , specters , creepers etc the dope and diet have caught ...

Shaggys pleased as punch with his new ride .

silvertriple wrote: ↑Mon May 22, 2023 12:01 pm Any plan for a run video (including night one! )?

Yes but only gently with the engine fitted , I may print a TPE engine in less detail for running , for those not yet 3d printing TPE is rubber like but hard to print detailed parts with .

2 days of RC in a vintage event in France : Montluçonnaise 2023 https://i.imgur.com/f7ODn3l.jpg https://i.imgur.com/bN5DWwO.jpg Lot of fun, some face on some pseudo (poke @ Trass), and a lot of runs on both a nice onroad track with nice curves and a very nice offroad track in a very vintage spirit,...

Hi! More update on this chassis ;) Here are the pictures ... https://media.joomeo.com/large/646bb57e092d5.jpg https://media.joomeo.com/large/646bb58d426e2.jpg https://media.joomeo.com/large/646bb599a49a7.jpg https://media.joomeo.com/large/646bb5a60215b.jpg https://media.joomeo.com/large/646bb5b4564f...

The very last piece of the puzzle , an illuminated dashboard. He's going 0mph , your only ever going to be able to read the speed when he's stationary !

So, with the RC10 Graphite done, I figured I'd try to get somewhere on the Big Bear that I scooped up with that giant pile of free gold. It really doesn't look like it's been run much at all. The electronics are a mess and I'm not sure what direction I'll be going with that, keep it stock with the M...