RC10Talk - The Net's Largest Vintage R/C Community

I picked this old thing up at a swap meet, does anyone know what exactly these are and what the scoop is?

Just want to give a second opinion on body work for the Red Fox. The original Fox body is small compared to many other 1/10 scale buggies, and designed to wrap around the original monocoque chassis. Seems to be more or less a brim full conversion. Upper and lower rear arms, chassis, steering kit, f...

Good stuff Jason 8) Thanks for sharing your race report with us and lovely seeing the RC10 hold its own against the modern buggies. Car setup look immaculate as usual. Did you end sorting out the issues with the sensor wire? This was just put up on YouTube- https://youtu.be/GkBiTmv9S84 GkBiTmv9S84

Good stuff Jason 8) Thanks for sharing your race report with us and lovely seeing the RC10 hold its own against the modern buggies. Car setup look immaculate as usual. Did you end sorting out the issues with the sensor wire? This was just put up on YouTube- https://youtu.be/GkBiTmv9S84 I ended up j...

Did a little work on this one. Swapped the Novak receiver for a Tekin, to match the esc. Slightly modified an RJ Speed front bumper, and trimmed the body. Screenshot_20230613_110707_Gallery.jpg Screenshot_20230613_110727_Gallery.jpg Those aren't the body posts that'll be used, just some that were la...

Here's the base for an upcoming build. Graphite tub from Mr. Franky Yeung in Hongkong. Quality is second to none. 175 grams of pure happiness. On this build I will add all hop-ups I've collected over the years such as the Schumacher SACS, Factory Works steering, battery stap and rear tower. Yokomo w...

She made it over from Norway safely! Thank you @LurkingCAT !

Wild Willy with a shaky head pilots this crawler. This is my RCP Wreckluse steel crawler chassis. For the running hardware i used an Axial AX10 Scorpion XC1. It sports Yeah Racing front strobe headlights and regular rear lights. It has locked diffs and four wheel steering. It can crab walk as well. ...

RC10T 17.5 runner "M.I.P." This truck started out as a mid run 10t ebay junker I picked up about 15 years ago initially to salvage it for the plastic parts. The left over nose plate, nose tubes, and chassis were all bent. When covid hit I decided to do something with the left over chassis ...

t3_1.jpeg t3_2.jpeg This is my T3 built up on a hand made carbon fiber chassis. It was a challenge to make a 1 piece CF chassis that had both the front brace mount and the rear integrated bulkhead and mount. I see why there wasn't every a 3rd party version. Build thread is here https://www.rc10talk...

My Futaba FXT. Mostly stock with a few small upgrades. It has Schumacher silicone nitride diff balls, Tamiya CVD's, turnbuckles, and upgraded servo saver. Swapped the rear tires for Schumacher VEE-2's. All Futaba electronics, per manual: R112 receiver, S148 servo, and MC 210 esc. I added a Pro-Trix ...

Original 'Race Prep' AYK Radiant Mid conversion – one of the rarest cars in my collection I would think. They produced less than 50 of these 'Race Prep' conversions (according to Steve Dunn) before AYK approached them about making it an official kit, thus bringing about the Pro Radiant. The '87 Roms...

Original Wild One restored with a twist.

I always swore I'd never enter a car that loses a second time, but when you've lost as many times as I have it's hard not to. 10LSO. I just really like this car.

Throwing in my wild child 10L with Novak SS5300 motor. It needs better gripping tires. At part throttle and 25mph, grabbing full throttle causes the tires to break loose resulting in an immediate 'reversal of fortunes'. I probably need to find a longer running area so I can creep it up to a higher s...