RC10Talk - The Net's Largest Vintage R/C Community

Finished the rear body hole patch , it's not perfect but as it's going to be glued and filled before paint it will be fine .
[attachment=0]20230418_161647.jpg[/attachment[attachment=0]20230418_161658.jpg[/attachment]
[attachment=0]20230418_161658.jpg[/attachment]

A few more pictures with wheels.

I also posted this in the "What did you get in the post today?" thread but figured I'd throw a couple pics up here also. I love this truck already. Threw a new set of Anderson PowerPole connectors on the ESC to match my batteries (been using them for literally over 25 years) and took it ou...

Ok I mounted the front and rear bulkheads and motor mount. Going to build center shaft and diffs tomorrow and install.

Unfortunately, it could be any number of specs. Manufacturers routinely used the same cans and labels for their motors with the only difference being the winds. The only way to find out for sure is to take it apart to inspect the armature. CAM took the confusion further by not even using part number...

Started working on the front end repair. One of the holes was blown out and looking closely the other side hole was in the process of tearing out. I had been working on my other carbon and mixed some extra resin with captured dust from sanding the carbon fiber. I mixed the resin, carbon dust and fib...

A bit of sanding and priming , needs a little more work but getting there .

I bought this truck a long time ago with no idea what I’d do with it other than clean it up one day. Well the purchase of one exhaust manifold for a wrong car later I’ve got an idea. An early race truck build on a budget chassis…… Here’s an overall new layout on the chassis using the Ofna Pirate 10 ...

By far the best pictures i have seen of this car.

Hi there ....
I am a New member from germany, building a New RC10 with JC suspension parts.
Got a New tub, stealth is like New.
Run the donation car at the last Euro Masters in GB together with Mr Drescher in the A Main ....
Looking forward to a Clay race in July with the car.

I thought for sure I posted this car when I first built it but I can't find the thread. Anyway, I decided to change up a few things to make it more like a proper speed run car of the period. These are the parts I added: - Tecnacraft Aero-Trac & diff hub - HPI front arm brace, pro rear upper plat...

I need to get some wing buttons and bend a wire, but otherwise this one is done. The MCI decal set is pretty nice and definitely was the finishing touch I needed.
. .

The first product issued from this CAD thread is born...





Files are available here :
https://www.printables.com/model/478350-marui-big-bear-tire

Happy printing !

Toaster wrote: ↑Fri May 12, 2023 12:49 am This is amazing! Not sure I want to thank you for posting this however because now I want to build one! quick, beat me to it lol

Knowing Dinglem then next picture will be "and here is that car , I found it )
Seriously though , did you