RC10Talk - The Net's Largest Vintage R/C Community

I wouldn’t hate to see a 70% hawk

Hey Battletrak, you want to give a try to this? I have not yet modeled the front wheel.. lots of curvy annoyance in these lol I am currently printing lots of black stuff so don't have time to switch to white. These are still sized more or less for those Jconcepts tires. This is a test file for impa...

I don't think I can do that, technically all these parts would be owned by Losi and I don't want to risk lawsuits. You could take the stl file to a third party service and get them printed if you want or I could print you copies. I think cults even directly links you to services that will print. I ...

I started to draw up a retrofit case but when I measured the widths of the diff it just wasn’t going to look right. I can’t wait to see how you tackle it. Sometimes it just takes another persons take on it.

I had to drill mine out. I started to drive them with a drill blank but ended up mashing the end. I really need a tiny pinion puller. Maybe I’ll make something at some point.

I have boxes of test parts like that or I used to , now I just bin them before they build up , looking very nice so far , great job .

Does the MIP top shaft and slipper work?

Does the MIP top shaft and slipper work? Anything that fits in the stock transmission should fit in this, this is a direct replacement for the stock case. :) It was a general question, not specifically about your case. ;) I know the diff doesn't work due to the different axles. I am going to start ...

I might as well just turn this into a Losi mega-thread with all the projects I still need to work on lol

So I couldent resist. I bought the red one, Figured as it's my first ever Losi!.. I have a few mods in mind. Swapping the wheel nuts for white nylone. Thinking of painting the receiver/esc case orange. Try to source mini-T 1.0 springs. I've ordered JRX2 decals and panel decals in 1/16 scale from MCI...

HECK YEAH!!!! I'd be down to buying one, heck I'd buy 2 if you made them. Freaking cool!

It all looks to be printed , the 959 is described as fused nylon , that's selective laser sintering or multi jet Fusion , either way printed , the tires are described as having divots on the back face from the production method or in other words support material , I'd presume they are resin printed ...

The other thing about the tires without seeing them would be the quality , if they are resin printed they will look pretty flawless from one side but if they are FDM printed they will not be anything like the same finish as injection moulded tires even on the good side and without seeing a genuine p...

Soooo the kit for an original RC10 has worlds style bellcranks and a stealth trans brace ….

I like it.