Unfortunately, this is the only picture I could find of the "Hammer". I'll look through some of the other old magazines that I have to see if they have any better pictures.
So a few of you might have noticed that I haven't been as reliable or as fast as I was a month ago.............we have known for the last 6 weeks that there is a new little Hammer on the way in November... and my wife hasn't been as tolerant of me...
Ive got a Novak Hammer Pro in my gold pan . will I be able to run Lipo with this esc :?: ? Thanks in advance
Last post
you should be able to run a 2S lipo in pretty much any esc, the only problem with the lipo is you need to either make sure the esc has a lipocutoff alarm, install a small lipo alarm, or pay close attention to the cell voltage.
Just wanted to show off my efforts in Google Sketchup. I've been putting this Thorpy thing together the last few days. I thought several times it was close to be finished but I always come up with new things that must be added so it's still a work...
Last post
Amazing 3D. :D
2nd generation Thorp car.
Someone can machine a chassis?
Ok, so I'm about to embark on my Blackfoot build with a load of hop-ups and chromed parts. One question as regards the transmission which I was hoping to canvas some thoughts on. I have both the Thorp telescoping drive transmission and the Thorp dog...
Last post
Sorry to ask again, but can anyone provide a link to the traxxas sliders that are referenced above?
The ones that will work with the blackfoot are from the 4tec.
anybody have any old thorp parts lists or catalogs they could scan? I'm specifically looking for any losi listings, but would be interested to see what else they made.
Thanks!
Last post
I have a partial catalog but shows very little losi. Mostly Tamiya, kyosho showing the diffs broke down by part#'s. If you need any scans of the ball diffs just let me know.
I recently aquired a really rough original frog, I immediately began rebuilding it, opened up the tranny, and found a ball diff/slipper clutch in it. i knew these were not stock back in the 80's that i remember. Is this a Thorp? or is this a Tamiya...
Last post
Thanks everyone for the help confirming this, I appreciate it.