novak hammer pro and lipo ?

Post by **treyverb** » Thu Apr 01, 2010 2:42 pm

Ive got a Novak Hammer Pro in my gold pan . will I be able to run Lipo with this esc

? Thanks in advance

Post by **jwscab** » Thu Apr 01, 2010 2:50 pm

you should be able to run a 2S lipo in pretty much any esc, the only problem with the lipo is you need to either make sure the esc has a lipocutoff alarm, install a small lipo alarm, or pay close attention to the cell voltage.

the reason is that the lipo cells do not like to be discharged beyond a certain point, otherwise they can become damaged or severely reduced in peformance.

Post by **treyverb** » Thu Apr 01, 2010 2:53 pm

jwscab wrote:you should be able to run a 2S lipo in pretty much any esc, the only problem with the lipo is you need to either make sure the esc has a lipocutoff alarm, install a small lipo alarm, or pay close attention to the cell voltage.

the reason is that the lipo cells do not like to be discharged beyond a certain point, otherwise they can become damaged or severely reduced in peformance.

great thanks . thats what I needed to know

RC10Talk - The Net's Largest Vintage R/C Community