substitute for yoke wing mounts

[59burst]

anyone tried this?

mugen C0901 muffler stay
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=130342475547

[Bormac]

I reckon they would work just fine. Ive made some of my own with some pretty rough tooling in the shed. These are better than what I could make.

[NRG]

i probably got the real deal new in pack if interested pm me

Edited to add

yup got one last one here

[uzzi]

Bear in mind the Mugen 1/8 muffler stay uses a 4mm cs screw to mount...you might consider using muffler stays for 1/10 GP cars. They are more the 'correct' size and uses 3mm screws.

[59burst]

I reckon they would work just fine. Ive made some of my own with some pretty rough tooling in the shed. These are better than what I could make.

show us your job

Bear in mind the Mugen 1/8 muffler stay uses a 4mm cs screw to mount...you might consider using muffler stays for 1/10 GP cars. They are more the 'correct' size and uses 3mm screws.

I googled but couldn't find 1/10 muffler stays. do you have more info?

[uzzi]

Here is what i am talking about,

http://www.amainhobbies.com/product_info.php/cPath/1_25_1424/products_id/166597/n/Kyosho-Muffler-Stay-Holder-Set

You will also find that the wire gauge used is also alot more smaller in diameter than the Mugen version

[59burst]

I just put my order for kyosho muffler stay
I'll update the pics tomorrow
thanks for your help

[59burst]

got kyosho vz086 bags today.
and I noticed I need a tap bit. side holes are just the holes. no screw tap thread in there

[GJW]

whats happenin with kyosho these days bit inconsiderate get some pics up ha?

[uzzi]

Alternatively you could bend the wire at 90 degrees so the wire will come through vertically (if you are mounting it on the rear shock tower). However, if you want it on a 834B (mounted vertically from the chassis) then it will not work of course.

[59burst]

whats happenin with kyosho these days bit inconsiderate get some pics up ha?

it's natural it dosen't have tap thread on the side holes. it's for holding the piano wire
nothing wrong with kyosho

Alternatively you could bend the wire at 90 degrees so the wire will come through vertically (if you are mounting it on the rear shock tower). However, if you want it on a 834B (mounted vertically from the chassis) then it will not work of course.

yeh, I know it. and it was very easy to make the tap thread. I put inch screw in the wire hole very slowly and got what I need.

[phoenix]

one question: does anyone know what additional wing mounts masami used on the original 870C he won sydney with? He used the orriginal ones looking backwards from the tower and the added another set attached to the wires to regain height. But it looks like they are different ones (nearly comparable to old cat ones).

[59burst]

one question: does anyone know what additional wing mounts masami used on the original 870C he won sydney with? He used the orriginal ones looking backwards from the tower and the added another set attached to the wires to regain height. But it looks like they are different ones (nearly comparable to old cat ones).

any picture?

[phoenix]

one question: does anyone know what additional wing mounts masami used on the original 870C he won sydney with? He used the orriginal ones looking backwards from the tower and the added another set attached to the wires to regain height. But it looks like they are different ones (nearly comparable to old cat ones).

any picture?

Here we go: http://www.rc10talk.com/viewtopic.php?f=7&t=3833&hilit=masami

[phoenix]

any ideas anyone? Last part missing in my actual yokomo 870c build.