templeofspeed wrote:Is it possible that you've got a factory powdercoated chassis there?
no, i wondered that, but where the nose brace tubes touch the front of the nose plate there is one tiny chip and underneath it is DEFINATELY a gold pan.
thanks aykbobcat, no, it is in really nice shape, it's just that i want something different for the car i want to build.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like his passengers!" The late great Bob Monkhouse 1928 - 2003.
i'll do a test today on an old gold noseplate to see if normal paint stripper will hurt the anodizing. and the aluminum, for that matter. i'll let you know later today.
i'm guessing your goal is to re-annodize it, not just re-paint it?
scr8p wrote:i'll do a test today on an old gold noseplate to see if normal paint stripper will hurt the anodizing. and the aluminum, for that matter. i'll let you know later today.
i'm guessing your goal is to re-annodize it, not just re-paint it?
yeah, i want to mirror polish it then get it reanodised either blue or i'm swinging to black at present for a real mean looking car.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like his passengers!" The late great Bob Monkhouse 1928 - 2003.
AYKBOBCAT wrote:Isn't that more torubles than just finding a black chassis on ebay? Just my 2 cents...
Youc could probably get good $$ for that blue chassis....
probably, i'm watching a new black pan and noseplate at present so we'll see what happens. but the blue pan would be nice stripped back to its natural gold because i have a 6010 gold pan that's really nice (except for the pan) that could benefit from it, so i wouldn't sell it anyway. i'm not really a seller at present, i'm just loving buying and building
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like his passengers!" The late great Bob Monkhouse 1928 - 2003.
nice one, thanks for that. i'm gonna do it. maybe not for a few days till i see if i win a new black pan. clenched buttock time watching the price rise .
dont worry i wont seek legal action if it goes wrong scr8p
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like his passengers!" The late great Bob Monkhouse 1928 - 2003.
I have a Tamiya Avante in awesome condition.. it has been restored to the highest standards (mine!). Virtually every part is new, anything that isn't has been cleaned and restored and this car is everybit...
Last post
Cheers for the nice comments..
It is a LOVELY car - very pretty in the way that an RC10 is perhaps not..
As a racer at heart though - racing cars are what I collect, not these pretty, but probably more desirable cars.
Hey everyone, I have a set of kongs on my truck and need advice on what kind of servo I should use. I dont want to spend alot but I do think I need to upgrade. Thanks
Dave
Last post
whats a stock servo to you? futaba 3003, yes it's faster then that, a 3003 can't even move the tires when parked.
i had the cpe servo in my 1/8 buggy and it was slow, it was even slower in my clod. it works and it's tough but don't expect too much.
I can see this thread falling into the either in front of my eyes but that's OK. I thought I would start a DSLR thread as I am considering moving from my 35mm EOS to my first digital a 400D. If anyone has an opinion I would be interested, my budget...
Last post
Thanks Mel... those are a couple years old now as most of my newer stuff is on CD.... that was all I had on my hard drive. The Maseratis are from the Monterey Historics in 2003. That year was the Ford 100 Year Anv. and Ford was the marquee. Being a...
Alright, just like the Javelin (that I haven't bought yet, but still lust after, and the Avante which is the same situation) I really like the YZ10. It's so mean and hunkered down looking, and I can't stop staring at the shelfer that William has for...
Last post
there's not much of that original car left......just pretty much the diff pulleys and bulkheads right? :lol:
finally got the bearings i ordered off the back of 1300gt's build inspired by his front gearbox build i started this
IMAG0246s.jpg
got to go out tommorow to get some tube to make spacers so i can run it up and see what it sounds like.
not sure...
Last post
finally got this done,fitted to my project with rere scorpion arms functions ok will have to redo various bits but allright for a prototyp/work in progress,i can theoretically run this in a mid engine config but current shock setup preventing me...
Hi guys and gals , I need people's views on something .
I just found a broken tooth on one of my Ayk Bobcats diff gears , it's just one half broken tooth on one of the plastic sun gears or the gear that is fixed to the out drive .
So I duly tracked...
Last post
It's open , it's from 1985 , I don't think sealed diffs existed back then but I'm often wrong :oops: , I can grease it but there's no way of trapping the grease or an oil in place , the gears are exactly the same and mesh well together so I think we...
Let me start by saying the $ amount im complaining about is small. Its more about doing the right thing!
I recently bought two different bike parts on ebay. Both were BIN items. When I went to pay for the parts I realized the payment went to the...
Last post
maybe i went off a bit but this happens to me to the seller says something and its like he just wants to agree to anything as long as you pay up front once he has the money attitudes change i think the rule for coming on this forum for me should be...
not been on for a while amongst other things ive been building this
IMAG0134a.jpg
IMAG0135a.jpg
its obviously a work in progress i just got the driveshafts cut down, alloy sleves epoxied on and bolted into tamiya uj's and went to fit a set of...
Last post
got my unflanged bearings fitted and jobs a goodun, so its now sat on modern wheels will post some pics when ive sorted a body,thanks again chaps!