Jamin's Losi XXT-CR Graphite+ MK1 Motor Plate!
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Jamin's Losi XXT-CR Graphite+ MK1 Motor Plate!
Well here it is, well most of the parts anyway. This haul has taken me quite a few months so far, notably the BNIP chassis which I am so happy to have found as that was the decider in me doing the build. This truck is gonna be a Graphite+, but with some extra upgrades, hence me calling it the G++!!
I am still hunting down a few parts, some of them will set the build of nicely, and I am hoping I can get my hands on them soon, dare I say this is gonna better than my XX build
Here's some pics of the parts so far:-
I wont be building this until my other XXT is sprayed up, but I'll post up new parts as they arrive! Cant wait to get this built though, its gonna be killer!
I am still hunting down a few parts, some of them will set the build of nicely, and I am hoping I can get my hands on them soon, dare I say this is gonna better than my XX build
Here's some pics of the parts so far:-
I wont be building this until my other XXT is sprayed up, but I'll post up new parts as they arrive! Cant wait to get this built though, its gonna be killer!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: Jamin's Losi XXT-CR Graphite++ Build
Looking good! The anticipation of all these parts is almost as exciting as the actual build process or finished article.... I sometimes open up the box for my XX just to 'paw' the parts inside!
By the way - did the G+ XXT originally come with the ali shafts? Mine has MIP CVDs... I was under the impression the G+ was basically the same spec in terms of upgrades as the Kinwald buggy... which I think had CVDs too?
By the way - did the G+ XXT originally come with the ali shafts? Mine has MIP CVDs... I was under the impression the G+ was basically the same spec in terms of upgrades as the Kinwald buggy... which I think had CVDs too?
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: Jamin's Losi XXT-CR Graphite++ Build
Yeah, agreed, lots of nice new parts, thats what I do too! or to remember what bits i actually have bought!
It did come with CVD's, but I got the ally driveshafts at a bargain $12, and they are alot rarer than the CVD's, so thats the appeal. The rear suspension is gonna be a little different , these will set it off nicely!
I could always change my mind later, just to re-invent it - I am thinking shiny bones on my XX to match the motor plate
It did come with CVD's, but I got the ally driveshafts at a bargain $12, and they are alot rarer than the CVD's, so thats the appeal. The rear suspension is gonna be a little different , these will set it off nicely!
I could always change my mind later, just to re-invent it - I am thinking shiny bones on my XX to match the motor plate
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: Jamin's Losi XXT-CR Graphite++ Build
Here's a preview of some more parts I've scored recently, this should go down quite well:
Trinity blue rear hubs, pivot block and front brace (thanks to bearrickster for the brace), graphite VLA arms (required to fit the pivot block and hubs) and a set of Lunsford turnbuckles I picked up for a bargain £10!
I just need some Trinity blue threaded shock collars now...anyone!?
Trinity blue rear hubs, pivot block and front brace (thanks to bearrickster for the brace), graphite VLA arms (required to fit the pivot block and hubs) and a set of Lunsford turnbuckles I picked up for a bargain £10!
I just need some Trinity blue threaded shock collars now...anyone!?
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Now I've finished my XXT box-art I can concentrate on this build a little more, so I've collected a couple of new parts
I recently bought these shiny things: To match this shiny thing: But then along comes this blue thing and gives me another headache choice! Times are hard
I recently bought these shiny things: To match this shiny thing: But then along comes this blue thing and gives me another headache choice! Times are hard
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
-
- Approved Member
- Posts: 542
- Joined: Thu Dec 02, 2010 3:03 am
- Location: Japan
- Has thanked: 2 times
- Been thanked: 16 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
well,if you are unsure about the motor mount you can always sell one to me
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
The trouble is I have this annoying addiction (like most on here) to hoard parts regardless of whether I need them or not. The rarer the item is, the more I want it!mamadoesn`tletme wrote:well,if you are unsure about the motor mount you can always sell one to me
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- YZ-10
- Approved Member
- Posts: 422
- Joined: Sat Mar 01, 2008 7:30 pm
- Location: United Kingdom
- Been thanked: 1 time
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
I'm not alone thenjamin wrote:The trouble is I have this annoying addiction (like most on here) to hoard parts regardless of whether I need them or not. The rarer the item is, the more I want it!mamadoesn`tletme wrote:well,if you are unsure about the motor mount you can always sell one to me
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
You're definately not alone MattYZ-10 wrote:I'm not alone thenjamin wrote:The trouble is I have this annoying addiction (like most on here) to hoard parts regardless of whether I need them or not. The rarer the item is, the more I want it!mamadoesn`tletme wrote:well,if you are unsure about the motor mount you can always sell one to me
That blue motor plate looks gorgeous... such a vibrant blue... reminds me of 80s BMX parts
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
It matches the Trinity blue nicely! The camera flash probably makes it look brighter than it is though. Dan, you gonna get in on the truck build-off!? Its a mostly UK affair right now...DerbyDan wrote:You're definately not alone MattYZ-10 wrote: I'm not alone then
That blue motor plate looks gorgeous... such a vibrant blue... reminds me of 80s BMX parts
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Not sure to be honest Ben.... any spare time I have on 'tinkering' as my other half calls it.... i.e working on my model cars is either spent on the racers or on the Yokomo WCS which is nearing completion.
July is going to be a busy, month so we'll see how things pan out
July is going to be a busy, month so we'll see how things pan out
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Thats cool Dan, I know what you mean, its good for motivation thoughDerbyDan wrote:Not sure to be honest Ben.... any spare time I have on 'tinkering' as my other half calls it.... i.e working on my model cars is either spent on the racers or on the Yokomo WCS which is nearing completion.
July is going to be a busy, month so we'll see how things pan out
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- Brandon G
- Approved Member
- Posts: 2106
- Joined: Mon Oct 01, 2007 4:23 pm
- Location: Nashville, TN
- Been thanked: 2 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Looks like a nice project!
For some added flash:
http://cgi.ebay.com/Associated-FT-Aluminum-Screws-Losi-XX-XXT-ASC6911-/180679338999?pt=LH_DefaultDomain_0&hash=item2a1153ebf7
For some added flash:
http://cgi.ebay.com/Associated-FT-Aluminum-Screws-Losi-XX-XXT-ASC6911-/180679338999?pt=LH_DefaultDomain_0&hash=item2a1153ebf7
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Yeah I saw these a while back, but they are a darker blue to the Trinity items. I also have to be careful not to overload the truck with too many blue parts, as I think it will end up looking too much.Brandon G wrote:Looks like a nice project!
For some added flash:
http://cgi.ebay.com/Associated-FT-Aluminum-Screws-Losi-XX-XXT-ASC6911-/180679338999?pt=LH_DefaultDomain_0&hash=item2a1153ebf7
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 5:58 am
- Location: Suffolk, UK
- Been thanked: 24 times
Re: MMV Truck Challenger: Jamin's Losi XXT-CR Graphite++ Bui
Progress has been slooooooow as I have too much on right now, but I managed to find (with the help of bearrickster - thanks) some new Trinity stickers and an old-skool brace!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 722 Views
-
Last post by jmcbrayer
-
- 101 Replies
- 13336 Views
-
Last post by Lavigna
-
- 2 Replies
- 621 Views
-
Last post by Caine
-
- 7 Replies
- 1387 Views
-
Last post by keyesgood
-
- 8 Replies
- 1885 Views
-
Last post by FasterLouder
-
- 90 Replies
- 18379 Views
-
Last post by Lavigna
-
- 54 Replies
- 9679 Views
-
Last post by mikesofunny
-
- 5 Replies
- 1677 Views
-
Last post by Lavigna
Who is online
Users browsing this forum: No registered users and 7 guests