wasn't someone lookimg for a novak esc
wasn't someone lookimg for a novak esc
I can't remember where I read it at but I thought someone out ther was looking for a novak esc. was it the 410?
- templeofspeed
- Approved Member
- Posts: 2087
- Joined: Tue Aug 01, 2006 10:02 pm
- Location: Central Ohio
- Been thanked: 8 times
Re: wasn't someone lookimg for a novak esc
I'm looking for a 410 MXc, Erich is looking for a 410 M1 or M1c... sorry to say "Novak 410" leaves a lot wide open... there are always a few 410 M5's on ebay, those were a budget ESC. We're looking for the "top of the line back in the day" versions from 1991...
The 410 HPc's are good, but they're more a 1992/1994 era ESC... great for a Team Car, World's Car, or Team Truck.
Thanks for keeping an eye out!
Novak timeline:
http://www.teamnovak.com/timeline/timeline_1/index.html
http://www.teamnovak.com/timeline/timeline_2/timeline_2new.html
The 410 HPc's are good, but they're more a 1992/1994 era ESC... great for a Team Car, World's Car, or Team Truck.
Thanks for keeping an eye out!
Novak timeline:
http://www.teamnovak.com/timeline/timeline_1/index.html
http://www.teamnovak.com/timeline/timeline_2/timeline_2new.html
Re: wasn't someone lookimg for a novak esc
you guys have helped me out alot and just trying to return the favor. I will be keeping my eyes out for these now that I have the correct info.
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: wasn't someone lookimg for a novak esc
I would love to have a 610 RV. If you run into one of those cheap, I would like a shout out. By cheap I mean "hey buddy, you want this..". I'm kidding. I would like to find one for $40 or less but that will most likely never happen. They fetch a pretty good price. I don't know why, they were not very durable. I got snow on mine and it smoked for a while then lost reverse
He's an idiot. Comes from upbringing. His parents are probably idiots too.
- Eau Rouge
- Approved Member
- Posts: 2225
- Joined: Sat Jul 29, 2006 11:59 pm
- Location: Aurora, Illinois
- Has thanked: 2 times
- Been thanked: 2 times
Re: wasn't someone lookimg for a novak esc
And my Novak search includes an 828HV. It was the 8 to 28-cell drag/boat ESC from the late 80s. I've had a couple of NOS ones in my sight recently, and flaked out when it came time to fire.
Re: wasn't someone lookimg for a novak esc
I have an old Futaba ESC from around 91 I think it is an mc118 or something like that, anyway it was in a Panda stadium truck in a shed, we had a flood and it was submerged in two feet of water. It sat for two years and on a whim I check it out, low and behold it worked. It works pretty good but when it gets hot it gets glitchy. Now thats a peice of work. It just sits in a 10T that I put up, its just for looks now.
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: wasn't someone lookimg for a novak esc
If you don't power up electrics when they get wet, sometimes you just end up with clean electrics. But when you pump 8.4 volts to a 12 turn in the snow and a snowball rolls through your home-made air duct and takes up residency on top of your esc, things tend to get real smoky real quickRC Chick wrote:I have an old Futaba ESC from around 91 I think it is an mc118 or something like that, anyway it was in a Panda stadium truck in a shed, we had a flood and it was submerged in two feet of water. It sat for two years and on a whim I check it out, low and behold it worked. It works pretty good but when it gets hot it gets glitchy. Now thats a peice of work. It just sits in a 10T that I put up, its just for looks now.
He's an idiot. Comes from upbringing. His parents are probably idiots too.
- Halgar
- Approved Member
- Posts: 3319
- Joined: Tue Feb 07, 2006 12:34 pm
- Location: USA
- Has thanked: 148 times
- Been thanked: 190 times
Re: wasn't someone lookimg for a novak esc
When is Novak or one of the other electronics producers going to come out with a magic smoke calibration unit so that we can put the smoke back in where it belongs?
klavy69 wrote:... when I give you s&#t its a loan...I want it back!
-
- Approved Member
- Posts: 3756
- Joined: Tue Feb 07, 2006 2:12 pm
- Has thanked: 17 times
- Been thanked: 36 times
Re: wasn't someone lookimg for a novak esc
i've never seen magic smoke...
on my hustler 2.2 build, i even went as far as hooking up the battery wrong to the esc, which in turn melted the positive wire off the board and got things pretty hot...
i thought for sure i ruined it, but after i soldered the wire back on it worked.
on my hustler 2.2 build, i even went as far as hooking up the battery wrong to the esc, which in turn melted the positive wire off the board and got things pretty hot...
i thought for sure i ruined it, but after i soldered the wire back on it worked.
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: wasn't someone lookimg for a novak esc
That's awesome . We were always being reminded in class that Computer components were fragile and you couldn't touch the boards and surface mounts or drop anything. Shoot, I could not tell you how many times I drug something across a motherboard or dropped a hard drive. Yeah I agree it can be damaged and those things are not good for it. But that stuff is much tougher than I was lead to believe.badhoopty wrote:i've never seen magic smoke...
on my hustler 2.2 build, i even went as far as hooking up the battery wrong to the esc, which in turn melted the positive wire off the board and got things pretty hot...
i thought for sure i ruined it, but after i soldered the wire back on it worked.
He's an idiot. Comes from upbringing. His parents are probably idiots too.
- Erich Reichert
- Approved Member
- Posts: 1224
- Joined: Wed Jul 25, 2007 3:57 pm
- Location: Southbury, CT
- Been thanked: 1 time
Re: wasn't someone lookimg for a novak esc
MEEE!!!!! I need a 410M1c.
Temple, i have that mx if you're stillinterested too.
Temple, i have that mx if you're stillinterested too.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1752 Views
-
Last post by teman
-
- 6 Replies
- 1409 Views
-
Last post by scr8p
-
- 22 Replies
- 2770 Views
-
Last post by REMJ666
-
- 22 Replies
- 3733 Views
-
Last post by Dangeruss
-
- 8 Replies
- 1727 Views
-
Last post by Asso_man!
-
- 16 Replies
- 3870 Views
-
Last post by Tadracket
-
- 2 Replies
- 682 Views
-
Last post by GJW
-
- 18 Replies
- 2334 Views
-
Last post by RC10resto
Who is online
Users browsing this forum: No registered users and 4 guests