yokomo yz10 94 wheel hub part numbers

[CATS]

Hoping someone might be able to help!!

I have a yokomo yz10 94 and I want to check I have the correct hubs on the car (front and rear) are these part numbers correct? and which are the front and which are the rear


ZD433 - Yokomo Wheel Hub Set 3.5mm ARE THESE THE FRONTS??
ZD434 - Yokomo Wheel Hub Set 4mm
ZD435 - Yokomo Wheel Hub 5mm
ZD436 - Yokomo Wheel Hub 6mm ARE THESE THE REARS??

Thanks in advance

Scott

[CATS]

sorry, forgot to say I want them with 4 holes not 2 are the part numbers I given correct for this model???

[Asso_man!]

You can have a look here: http://www.rc10talk.com/viewtopic.php?f=7&t=3801
But I already did and the answer is not really there as the manual itself doesn't refer to these part numbers directly but rather to bag numbers. That being said, the Japanese list at the end of the manual refers to all the re numbers you mention above. I will measure them on mine tonight if somebody hasn't replied in the meantime. Too bad Hyeong translation of the parts list is gone...

[Charlie don't surf]

Other than measuring mine on the car I'm not sure, the rears on your 94' are the 870 type for sure. Yokomo part numbers rarely changed per model change, but I think the offset that your needing didn't come around until 93' and I think that they all have 4 holes at that point.

[a01butal]

I have the 94 YZ-10 catalog and these numbers are listed:

ZD-434 4mm with description and small illustration
ZD-436 6mm with description and small illustration

also listed are :

ZD-433 3.5mm with description and no illustration
ZD-435 5mm with description and no illustration.

You can draw your own conclusion as they don't state which is standard but I think the ZD-434 and ZD-436 shown with illustration would be the standard that is supplied with the kit and the others are options.

[CATS]

Thank you a01butal

ZD-434 & ZD-436 is what I thought! Ive placed an order, Thanks for your help guys. These ol yokomo's are a nightmare for finding parts!!!!

[midse]

Thank you a01butal

ZD-434 & ZD-436 is what I thought! Ive placed an order, Thanks for your help guys. These ol yokomo's are a nightmare for finding parts!!!!

Where did you order from??? I have a yz10 missing front right suspension and need parts - Any assistance is appreciated

[ralphee]

Thank you a01butal

ZD-434 & ZD-436 is what I thought! Ive placed an order, Thanks for your help guys. These ol yokomo's are a nightmare for finding parts!!!!

Tell me about it . Luckily im done now, just waiting on the last few parts to land, and i can begin my build, its cost a packet, but the end will be worth it seeing it properly done.

lee