Id agree thats an Andy's, think there is a pair on the 'bay so you could put a couple of new ones on, but i dont have any parts for this sadly. Bit of work there for sure. Chassis looks well pooped by the cell slot too.
ralphee wrote:Id agree thats an Andy's, think there is a pair on the 'bay so you could put a couple of new ones on, but i dont have any parts for this sadly. Bit of work there for sure. Chassis looks well pooped by the cell slot too.
lee
An Andy's arm for an rc10 just really does not belong on a yz10
(odd words coming from me perhaps, but the sweep back is just too much)
There's a full RPM and andy's kit for the 870 in the BST section
That's a sad looking dog. I remember finding this forum because of my first dogfighter - you're in the right track.
I might be able to help you out on some parts. I think I have a full shock set, a hub carrier and at least one suspension arm. Let us know what you need.
I acquired this via Facebook. Talked with him some, and found he only ran it a few times. From the looks of it, it definitely hadn't been run much. The belts look new....
Hi. New to the forum. Just dug out my YZ-10 and thinking about getting it rolling again.
When I left my YZ10, I had a bent front left drive shaft that resulted in the front wheel bearings blowing up with some (a lot of) regulaity. The reason why I...
Last post
I aleady use the clamp type hexes as they reduce wheel wobble a lot compared to older style standard hexes
My attempt at a 97...not quite finished but couldn't resist posting anyway! Its taken 4 years to get to this after seeing a 2 page spread in the Oct 97 issue of radio race car (photo attached). Enjoy.....
Last post
Very cool Paint job - incorporating both the Japanese and the Amercian flag
I recall this one as being an YZ10 - Is this correct?
Misc 005.JPG Misc 004.JPG
Last post
The hotdog runs works 91 rear arms I believe, in which case you should be able to use the universals from the '91. Part number for the universals is zc-423 I think....
The latest addition to the Yokomo fleet arrived earlier this week. This one will be a runner, so aesthetics aren't an issue. The base car is a '94 but its a got a few nice additions. Front and rear shock towers, carbon steering links and rear camber...
Last post
Cheers buddy, here's hoping she's fast. The wheels are by Fastrax / JC, they are still available from JC Racing.
Got this off of epay over the weekend. I'm slowly get the Yok bug. These things are way cool. I plan on cleaning it up and possibly changing out the chassis for a nip compsite craft chassis and shock towers along with other new bits. Are the pink...
Last post
Cool, Thanks !!! The one i have is the rpm brace. The previous owner told me that the brace required some cutting or sanding as per the instructions for the brace. He didn't recall the brand but now i know, Thanks again!!