My first RC, Late Stealth RC10CE #6011
My first RC, Late Stealth RC10CE #6011
Hello!
I've been reading tons of threads how to modernize 1/4" > 3/16" to fit newer wheels, and decided to start modifying my gold pan.
I've been storing it about 16 years and finally took it on table to see what can i do for it. When i got it ~1996 (i was something like 12 years old), i build it, but also made some mistakes because of my very bad english (haven't got any better since), and also some small parts have losted.
Chassis is stamp C with Stealth transmission, and that's about everything what i know about it =)
I'm planning to use B44 CVD's, RPM RC10GT hubs and self made aluminium rear arms (hinge pin distance from center to center 2.5" , same as worlds and klein?). Planned arms thickness is 6mm, with 5 mounting holes for shocks.
I'll propably do something to front also, but just don't know what.. Also B4 idler on Stealth would be nice?
Feel tell me if something is wrong with my plannings or if there any other questions/advices.
I'll post few pics from project for you =)
And early desing for rear arms =)
-- Ossi
I've been reading tons of threads how to modernize 1/4" > 3/16" to fit newer wheels, and decided to start modifying my gold pan.
I've been storing it about 16 years and finally took it on table to see what can i do for it. When i got it ~1996 (i was something like 12 years old), i build it, but also made some mistakes because of my very bad english (haven't got any better since), and also some small parts have losted.
Chassis is stamp C with Stealth transmission, and that's about everything what i know about it =)
I'm planning to use B44 CVD's, RPM RC10GT hubs and self made aluminium rear arms (hinge pin distance from center to center 2.5" , same as worlds and klein?). Planned arms thickness is 6mm, with 5 mounting holes for shocks.
I'll propably do something to front also, but just don't know what.. Also B4 idler on Stealth would be nice?
Feel tell me if something is wrong with my plannings or if there any other questions/advices.
I'll post few pics from project for you =)
And early desing for rear arms =)
-- Ossi
-
- Approved Member
- Posts: 35
- Joined: Wed Feb 15, 2012 4:57 pm
Re: My first RC, Late Stealth RC10CE #6011
you have nearly a exact copy of mine. The late cars seem to be a cluster of whatever they had laying around, that's for sure. Keep posting pictures of progress!
-
- Approved Member
- Posts: 1136
- Joined: Tue Jul 29, 2008 1:04 am
- Location: San Jose, Ca.
- Been thanked: 1 time
Re: My first RC, Late Stealth RC10CE #6011
Why all the holes for shock mounting? In reallity, the only holes ever used are the two outer. And of the two, the outer is used most of the time. -Jeff
Re: My first RC, Late Stealth RC10CE #6011
Finally almost get something done =)
Here's something that i've found for this car:
- cheap brushless ESC bought from eBay, Bullistorm 120A. Don't know how long it's gonna work... only ~$30.
- 8.5T EC Power brushless motor from friend ~$20.
- ordered FS-GT3B controller from eBay ~$40.
- few bodys from friend ~$20.
- cheap hardcase lipo from eBay ~$25.
Currently using B4 stub axles on rear, stock bones and b2/b3 rims. Seems to fit fine, when not too much camber.
Now, there's a pic showing what i got in today's mail =)
Still waiting top shaft, carbide balls and something i even can't remember...
Someday i might get pair of these too...
Here's something that i've found for this car:
- cheap brushless ESC bought from eBay, Bullistorm 120A. Don't know how long it's gonna work... only ~$30.
- 8.5T EC Power brushless motor from friend ~$20.
- ordered FS-GT3B controller from eBay ~$40.
- few bodys from friend ~$20.
- cheap hardcase lipo from eBay ~$25.
Currently using B4 stub axles on rear, stock bones and b2/b3 rims. Seems to fit fine, when not too much camber.
Now, there's a pic showing what i got in today's mail =)
Still waiting top shaft, carbide balls and something i even can't remember...
Someday i might get pair of these too...
-
- Approved Member
- Posts: 62
- Joined: Sat Jun 09, 2012 6:38 pm
- Location: Amish Ohio
Re: My first RC, Late Stealth RC10CE #6011
My ce is from 96 as well guess I lucked out ass all of my parts are black. Get some new spindles. Lol
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: My first RC, Late Stealth RC10CE #6011
I am rebuilding a late CE for my buddy right now, only black on the car were the 4 arms, everything else was minty white (which he donated to me for swapping on all black parts ) Does have the late worlds style gold nose (V shaped, not square like all of mine).
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 5:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 626 times
- Been thanked: 167 times
Re: My first RC, Late Stealth RC10CE #6011
Yep, late CE is a wonderful runner, it's the poor man's world car, basically a worlds car without the teflon shock bodies, UJ's, steering and milled chassis. Here's mine!
Paul
Paul
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Re: My first RC, Late Stealth RC10CE #6011
I planned to make my own steering from aluminium with ball bearings.
But nobody really knows, if i never get those planned things ready =D
Still need that top shaft and those carbide balls to build that stealth from scratch..
I'll be using only casing, outputs, plastic nut and that long screw from old one..
But nobody really knows, if i never get those planned things ready =D
Still need that top shaft and those carbide balls to build that stealth from scratch..
I'll be using only casing, outputs, plastic nut and that long screw from old one..
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 4201 Views
-
Last post by Winger
-
- 6 Replies
- 1104 Views
-
Last post by pottok
-
- 13 Replies
- 1965 Views
-
Last post by vsefiream
-
- 3 Replies
- 1266 Views
-
Last post by jeepy2013
-
- 7 Replies
- 1014 Views
-
Last post by RC10resto
-
- 11 Replies
- 1535 Views
-
Last post by Johnboy72
-
- 9 Replies
- 812 Views
-
Last post by Bugle
-
- 33 Replies
- 4326 Views
-
Last post by THUNDERSTRIKE1
Who is online
Users browsing this forum: No registered users and 46 guests