I got a new to me car recently and it's all clean and polished and right off would look good on the shelf , however on close inspection two of the three diffs are screwed and the whole steering system would drop apart the moment it started moving ....
Last post
Most of my builds are shelfers. All of my cars could technically be run but sometimes they’re not set up to run well. For example, I just built an RC10 with vintage Proline “hard” 2.2 rear tires. I bought some current Schumacher spike front tires...
Here is my completed 6010. I bought a very nice car that had been run for what looked like one pack and then put away for 20 years or so. It had the normal 'stored' RC10 issues - perished Tyres, leaked shocks on the wishbones which made them yellow...
Last post
Tom stacey, you did a great job on your resto. I like the hornet tires. I have a pair of CRP dynamites for the RC-10 that look very similar.
I picked up a complete RC10 #6010 with Futaba Radio, spare parts and charger for cheap the other day.
Looks like the only parts added were front and rear A-Arms, some larger front truck tires, and the Truck body mounts. Only thing I need is a...
Last post
I have a rc10t3. Does anyone know where to get metal diff and idler gear?
My 9 year old son and I have decided to resurrect my RC 10 #6010 which I dusted off from the basement. I need a new controller, battery, motor and looking to upgrade to an electronic speed control. I’m thinking that these are the essentials...
Last post
Jconcepts has new tires and wheels that have a vintage look but with modern tire technology.
Judging by the caps and seals, those look like bottom load shocks. I'd just clean them and install new o rings with the old hardware and spacers.
Looking for part #/source for the white ball links. The Dubro ones I have (#181) are for 2-56 rods, not sure about #188. Associated 6274 are black. Also what tires will fit the factory rims that look similar to these all-terrain or rally? Front and...
Last post
Proline used to make Roadhawg tires that fit the original wheels, they are a road tread, and you can go onto their site and see the current Roadhawgs (for 2.2 Truck). Imex also had some street style tread.