RC10T hex wheel conversion?

[janaya]

Hello everyone I just wanted to reach out and ask if there are any hex wheel Conversions that have been cooked up. I have tried looking through the threads but keep getting distracted looking and reading through other ones that I have not found anything. Thanks for any leads to threads on it.

[hawgfanman]

You can use the SC10 conversion on the front. JConcepts makes one. For the rear all you have to do is put the hex on (if you've already upgraded to 3/16 axles).

[Sixtysixdeuce]

There is currently one fellow offering 1/4" axle hex adapters:

http://www.pargustore.com/associated-rc10-hex-adapter-for-rc10-1-4-axles.html

[janaya]

Wait so its that straight forward on the 10T. Ok so just throw on the hex adapters on the rear. Now the front I assume that along with the steering block/hex axle you have to switch out the castor block as well?

[jwscab]

yes you use the sc10 front parts and drill out the lower pin for 1/8"

[janaya]

How did the castor block thing go? To stay at 30* with late modle blocks run 25* is that right? Can't remember ago posted that

[janaya]

Sorry for all the questions guys, I'm at work and trying to read through threads when I shouldn't be. Thanks

[klavy69]

, I'm at work and trying to read through threads when I shouldn't be.

at least you know you shouldn't be

Todd

[janaya]

It seems like an addiction to me sometimes. I should find a job in RC then maybe it won't frowned upon to go through rc forum threads.

[jwscab]

the older kickup is 30 degrees, the new kickup is 25 degrees. so if you buy 25 degree caster blocks, they will effectively be 30 degree blocks. adjust from there: 20 degree sc10 blocks would be 25 degree on the rc10.

[jaro]

OK, I have the 3/16" axles and some AE hexes for the rear. Can I ask what wheels will fit the rear of the RC10T to give the same offset, will T4 wheels fit or do I need to use another make?

Thanks.

[justinspeed79]

T4 wheels fit perfectly.

[jaro]

T4 wheels fit perfectly.

Thanks, that's what I wanted to hear