B2 Pre-Production Worlds Build (Electronics Added 11-27)

[mikea96]

Actually i found it on ebay.

[mikea96]

Got the rear lower chassis plate done and installed and the Reedy Sonic installed. Hopefully i will be able to find a NIP B2 body someday.

[hawgfanman]

Looks good Mike! Did you have the chassis plate made or did you find that too?

[mikea96]

It was a stock B2 plate that I filled the cutout on.

[sandkil]

Nicely done.
Well if you happen to stumble upon a stash of B2 bodies be sure to give me a holler
I reckon you're going for the #6133 body.

[mikea96]

Thanks and yes the 6133 body.

[mikea96]

Would a LRP indy 600 esc be period correct for this build?

[mikea96]

So I found at that 600 was later so I guess I need to find the LRP ICS for this.

[sandkil]

A LRP ICS or black IPC would work. You could also go with Novak Tempest.

[mikea96]

Ok so she is almost done. I rebuilt the shocks and installed the new tires and wheels. The rear tires will be changed and i might put the yellow wheels on it. Just need a New body now and a new or mint Lrp ICS esc. Here are a few new pics along side her younger brother a new built B3 FT.

[mikea96]

So i installed a new set of Proline Square fuzzies and i also picked up a new hitec reciever that Matt Francis used in his 95 worlds B2. I will add some new photos shortly.

[uniquenamehere]

So i installed new gold shock shafts and a new set of Proline Square fuzzies and i also picked up a new hitec reciever that Matt Francis used in his 95 worlds B2. I will add some new photos shortly.

looks awesome Mike...

[spydur23]

Nope the tranny, motor plate and that brace came from a Associated driver from the mid 90's

That tranny was a good score!!! So cool to find those kinds of relics.

[mikea96]

Especially when there were only such a limited number done!

[spydur23]

Especially when there were only such a limited number done!

What's the brace made of?