Lethal Weapon Pinion/Spur combos

[TRX-1-3]

So I was wondering if any of y'all got the same issue(s)? Have an 87T spur and a 20T pinion on a Lethal Weapon trans/Power Clutch. The motor bottoms out against the tranny case and the gears barely mesh. So, duh, larger spur or pinion, right? Well I was wondering if anyone could recommend a larger compatible spur gear. So I guess that is my question:

Which manufacturer(s) make (made) Lethal Weapon /PowerClutch compatible spurs larger than 87T?

Thanks,

Mark

[DaveM]

Hi Mark,

Wouldn't the old style Kimbrough spur work?

Like this one -

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS468&P=7

Looking at the kit in Hobby shop, hop up hints magazine, the kit doesn't come with a spur, so I think

the old style Kimbrough should work.

Compare your old one to the pic.

Cheers, Dave.

[Daryl Lane]

Hi Mark
We always ran 48 pitch 90 to 96 tooth spurs stock and mod with 26 to 40 tooth pinions. I liked the tooth angles better on the larger gears. I mostly ran Kimbrough spurs and Robinson racing spurs.