Now you've done it... Prepare for a flood of messages asking to sell 1 of those.
Does the jealousy use the same pitch belt as the other Hirobo's?
Hi,
ha ha ha
Up until now I haven't gotten any PMs about that.
actually, I've never shown my Jealousy on any forum before.
Here on RC10Talk is the first time ever.
Jealousy & Invader have the same pitch belt. others I need to check.
It's very similar to its predecessors. It seems they just cut down on the chassis. I'm betting the drivetrain is exactly the same as the Alien Mid and Invader.
rcpitwork... If you want to sell one, let me know!
I have also had in the past one of 68 not in Asia delivered Hirobo Jealousys! I think I bought the kit in a Munich RC shop on Wotan street. Never built this car because I had it at the same time as an Optima Mid... rest is past. I sold this kit after years to a Munich modeler.
This was a only 300pcs. kit car.
Please show us more pics.
I don't recall where I saved the pics of this car before I took it apart :oops:
Anyway, The car I have and would like identified is 4WD with the moter behind the wheels. It has a 2 part metal lower chassis and the battery runs lengthwise.
The 2...
Last post
That's some of the parts I was missing indeed, but the original carriers only use one bearing: not my favourite concept ;)
I'm just going to have fun and see what I can make out of this without putting much money in it for now.
(Though I have to...
Pretty much a new build.
I had a lot of parts gathered up over a few years.
missing the driver (although I 'think' I could use a Kyosho or indeed AE one) and missing 1 cross piece for the cage.
my story with this car was that I went to a...
Last post
With one of the test parts I did sanding with 500 grit sandpaper and then light brush with Acetone. Acetone will soften and bind the plastic layers together. It will also put a shine on the plastic. Don't use too much Acetone or it will soften the...