NIX10M

[mikea96]

So is the aluminum version of this available?

[JK Racing]

Yes, my 10M is aluminum

[mikea96]

Where are they available?

[JK Racing]

Jake's making them, check his dealer area. Love mine gotta re-learn how to drive it.

[RC10th]

Is it still snap spinning? Have you changed set up much?

[JK Racing]

I put limiters in the rear shocks, moved the bottoms in one hole. Looked over the front suspension and found I had a TON of droop. Adjusted that with limiters and rebuilt all 4 shocks. 99% better, found it likes to be slightly on throttle in the corners, when I completely lay off (zero drag brake) it unloads and loosens up. Using a touch of power not only got me much faster corner speeds, I noticed it squared up and rocketed forward off the corners better. I had a good drop in lap times until I broke a ball stud in the rear bulkhead

Oh, I put brown front, white rear big bore springs on the vintage shocks too...that may have helped

[bjammin90]

Anyone know if the #63056 hard anodized chassis are available? I'd like to build a NIX10MQ but just need the chassis.

[Niki]

No production run of #63056 chassis yet. One batch of #63053 chassis has been done. It's sold out.
If you want a carbon #63051 chassis set Fibre-Lyte can help you out with that.

-Niki-

[bjammin90]

No production run of #63056 chassis yet. One batch of #63053 chassis has been done. It's sold out.
If you want a carbon #63051 chassis set Fibre-Lyte can help you out with that.

-Niki-

Thanks Niki. I don't see it listed... would they have the ability to make just one?

[Niki]

Yes, they can cut just one part or one set. I will list part prices when I get confirmation from them.

[bjammin90]

Yes, they can cut just one part or one set. I will list part prices when I get confirmation from them.

Awesome, thank you Sir!

[Niki]

These are the current prices. Fibre-Lyte has all needed drawings to cut parts for you.
Hopefully in near future we can find NIX-parts from Fibre-Lyte website.
Ordering info from http://www.fibre-lyte.co.uk
I don't have any business connection or deal with Fibre-Lyte. I'm just a happy customer like you are and pay same price for the parts like you do.

-Niki-

----------------------------
Material: "carbon660"

non-EU prices excluding VAT;

NIX63051 (flat chassis) - GBP43.75 (2.5mm), GBP48.13 (3mm)
NIX65931 (transmission brace) - GBP3.75
NIX63391 (lipo strap) - GBP8.54
NIX63372 (buggy nose tube mounts) - GBP2.83 each x 2 = GBP5.66
NIX63375 (truck nose tube mounts) - GBP2.46 each x 2 = GBP4.92
NIX62321 (buggy nose front tower) - GBP11.50
NIX63771 (rear tower) - GBP8.13
NIX63373 (antenna mount) - GBP1.46

EU prices (which include VAT) are as follows.

NIX63051 (flat chassis) - GBP52.50 (2.5mm), GBP57.75 (3mm)
NIX65931 (transmission brace) - GBP4.50
NIX63391 (lipo strap) - GBP10.25
NIX63372 (buggy nose tube mounts) - GBP3.40 each x 2 = GBP6.80
NIX63375 (truck nose tube mounts) - GBP2.95 each x 2 = GBP5.90
NIX62321 (buggy nose front tower) - GBP13.80
NIX63771 (rear tower) - GBP9.75
NIX63373 (antenna mount) - GBP1.75
---------------------------

[bjammin90]

This is perfect.
Thank you!

[atarit3]

Thanks for all the info Niki. I was able to grab one of the aluminum NIX10M kits recently from CNCRC, and I love the workmanship. I've already started assembling the kit with some 3D printed parts, and am going to order some extra shock towers/transmission braces from your fibre-lyte recommendation.

Will have to post a pick when it's ready for track action!

Thanks!

[Niki]

That's great! Some building-state pictures would be nice also