What Body fits best on a RC10 Graphite?
-
- Approved Member
- Posts: 537
- Joined: Sat Jun 24, 2006 6:41 am
- Location: Herrenberg, Germany
- Has thanked: 29 times
- Been thanked: 66 times
What Body fits best on a RC10 Graphite?
I know a lot of you will think that it is sacreligious, but I am considering to put either a Losi XX (I have one), or a Losi JRX Pro SE body onto my RC10 graphite WOIN mid motor setup.
Wich one fits better width wise.
Now you can start flaming me......
Wich one fits better width wise.
Now you can start flaming me......
*** POWDER - KING ***
-
- Approved Member
- Posts: 942
- Joined: Wed Aug 07, 2013 5:25 am
- Location: Oregon Coast
- Has thanked: 100 times
- Been thanked: 206 times
Re: What Body fits best on a RC10 Graphite?
I do not have an rc10 graphite but if the line of holes on each side of the plate for side to side battery mounting is the same as on an aluminum tub the pro SE will be the tightest fitting body to the rc10 graphite chassis. Saying this you know the front of the losi chassis is narrower then an rc10 chassis which might require creative trimming at the front of either XX or ProSE
Losi - Jrx2, Pro, Jr2, Pro SE, JrxT, JrT, LXT, NXT, XXKE, XXTG+
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: What Body fits best on a RC10 Graphite?
I used an Andys Renegade body for my graphite buggy. I like the classic squared lines compared to the swoopy rounded shape of Losi bodies.
-
- Approved Member
- Posts: 537
- Joined: Sat Jun 24, 2006 6:41 am
- Location: Herrenberg, Germany
- Has thanked: 29 times
- Been thanked: 66 times
Re: What Body fits best on a RC10 Graphite?
Thanks for the suggestions.
Shodog, do you also have a picture from the bottom? Since mine is a mid motor, my shock tower is way back. The XX body I have seems to be wider in the back, I believe the Pro SE body is similar in that area.
Shodog, do you also have a picture from the bottom? Since mine is a mid motor, my shock tower is way back. The XX body I have seems to be wider in the back, I believe the Pro SE body is similar in that area.
*** POWDER - KING ***
Re: What Body fits best on a RC10 Graphite?
I use the ProTech body. Fits like a glove.
In Christ,
Joel C.
Joel C.
- yellowdatsun
- Approved Member
- Posts: 844
- Joined: Mon Jul 20, 2015 1:15 pm
- Location: Phx, AZ
Re: What Body fits best on a RC10 Graphite?
The newer design Jconcepts Detonator fits longer shock tower distances better. That's what I have on my mid-motor project, and it fits great.
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: What Body fits best on a RC10 Graphite?
The back of this body is pretty wide. I recal seeing one cut to fit a mid motor chassis on one of the favbook forums
-
- Approved Member
- Posts: 537
- Joined: Sat Jun 24, 2006 6:41 am
- Location: Herrenberg, Germany
- Has thanked: 29 times
- Been thanked: 66 times
Re: What Body fits best on a RC10 Graphite?
Hi all,
I know I am reviving a really old topic from myself, but google found me this body on ebay, and my own old thread.
I actually think the Losi PRO SE body looks pretty good on the RPM ultra molded kit, I believe it will be a good fit on my mid motor graphte as well.
I have purchased from Peguin before, the TRX 3 Repro bodies.
I copied this picture and added the Penguin marking:
Please delete if not allowed
What do you guys think about this body on an RC10 ?
I know I am reviving a really old topic from myself, but google found me this body on ebay, and my own old thread.
I actually think the Losi PRO SE body looks pretty good on the RPM ultra molded kit, I believe it will be a good fit on my mid motor graphte as well.
I have purchased from Peguin before, the TRX 3 Repro bodies.
I copied this picture and added the Penguin marking:
Please delete if not allowed
What do you guys think about this body on an RC10 ?
*** POWDER - KING ***
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 941 Views
-
Last post by tecnica2001
-
- 6 Replies
- 1074 Views
-
Last post by scr8p
-
- 2 Replies
- 369 Views
-
Last post by edwin pibal
-
- 5 Replies
- 441 Views
-
Last post by scr8p
-
- 8 Replies
- 2508 Views
-
Last post by Dadio
-
- 59 Replies
- 3446 Views
-
Last post by Frankentruck
-
- 4 Replies
- 1988 Views
-
Last post by lexus-5
-
- 2 Replies
- 1051 Views
-
Last post by chophead69
Who is online
Users browsing this forum: Google [Bot] and 46 guests