Did Novak ever use gold colored (eg. like the ones on Tekin) heatsinks on their vintage esc's? I was looking at a M1c for sale and it has gold heatsinks.
I hit it at $52 at the last few seconds, no more time to go higher. Oh well, I bought a working one on eBay last week for $44. Not as pretty but it will work.
mikea96 wrote: ↑Sat Oct 21, 2017 1:40 pm
I picked up that M1c that was a good deal at 67 and i picked up the Tekin as well.
I'm trying to figure out how the old barrel type resistor heat sinks were used. They seem to come in 2 threaded pieces. Can somebody show or explain please?
Thank you!
I did a quick search and a lot of people have asked about these on and off over the past few years, as a result of using brushed motors with Lipo power.
I was actually searching for info on the other larger ones which kind of wedged in the centre...
Last post
Yes i still have some left but a lot did sell pretty quickly. Will drop you a PM.
Hello! I'm a new member, but frequent these pages when I'm looking for information. I found your post when I was internet searching for brush heatsinks. Maybe...
I've been assembling a collection of vintage radio gear so I can start outfitting my buggies. This set up is slated for my 6016 buggy. First is my Novak 2H high powered servo which came out in 1983.
Next is my 1X ESC which was the top of Novak’s...
Last post
I had no problems swapping my NES1A from JR to G, it's fiddly, but with a good iron, steady hand, good light and magnification not a big deal.
I'm working on a Gulf Racing schemed RC10L and wanted to put modern Novak electronics in it (brushless & Lipo), BUT I was thinking an orange receiver would look sweet. Is there any difference in a vintage FM receiver and a modern one?...
Last post
Damn, gulf oil theme colors, i had that idea too! But I have too many projects underway...
it's a good colour scheme, which car/buggy/truck are you planning on putting it on?
I got mine on a 10L, but think it would be cool on a buggy
I'm sure this topic has been touched upon several times on these forums...
I just bought a set of new vintage Novak decals. I should have a total of 4 different types of sheets. One from the Hammer, one from the 410-M5, and two others that have all...
Last post
This is about as good as I can get this one without some MAJOR time invested...this took about 1½ hours anyway to colorize. The orange was a real PITA...
This of course, is shrunk to comply with the size rules here, if anyone wants the full size 600...
I have a couple of Novak Digi Peak Plus chargers that Ive accumulated purely out of nostalgia's sake and also have some new old skool Sanyo Nicad's which i want to charge, store and care for in a proper manner.
Now if my memory serves me we used...
Last post
Thanks heaps Mark. You have a wealth of knowledge on this stuff. Cheers-Jason
I picked these up last week to experiment with. They didn't really cost much at all and they work :twisted:
I can program the Cyclone with my own custom parameters or use one of the 20 saved Novak sets to use as profile 4 on the Cyclone. Too bad I...
Last post
Wait, you have a computer with a serial port and diskette drive? :wink:
I'm a Mac guy in all honesty, but yes I do. I found it in the garbage and put XP on it :mrgreen: I use it mainly for the old school Toyota Electronic Parts Catalog Software...