Only gained about 1 mph and my et’s weren’t great no gains there, need to do better in the first 30 feet. My Street Outlaw car did not like the top end figured out rear shock tower was way loose and just rocked the car at high speed.
Ran best mph so far @ 57.2 only got like 3-4 runs in this foam tire racing is time consuming with the tire prep but its fun..... 2 mph gains pretty good considering the only difference was timing up one level and turning the punch down 2 levels. Leaving the punch on kill caused the car to do a wheelie with the tire prep I did kind of surprised me , havent been better with the et's but close to my best so far needs more tuning..............
coxbros1 wrote: ↑Mon Feb 17, 2020 7:44 am
Got that DS hauling! Why does the other car flip at the finish?
The videos before this last one was a bad outing, the rear shock tower was loose on the Outlaw car and would rock the car at the top end and just lose control and flip, in the latest video the flip was do to over correcting the steering. The Outlaw car is very sensitive to any steering input with the locked diff...........................Im not to savvy with the remote control features but was told to slow the steering rate down a bit so next time we will see...............................................
Visit Nostalgic RC in the business section or @nostalgicrc on Facebook for your custom RC10DS parts
Gone: RC10, Jrx-2 and Jrx-t
Current: 3 SC10 first gens, 3 SC10 Street Outlaw's, 12 RC10 DS’s, Carbon RC10T, RC10LSS,RC10L, RC10 Graphite,RC10 B44
Decent piece! I know its sounds like alot but go to servo speed (if u havent already) and back the throttle side down to 50% or lower, u will be amazed....once u find the right %, prolly in the 30% range, u will be able to dead hook that car. Not sure what servo u got, but slowing the servo speed down on the steering, say to 75%, will calm ir down on the big end. If u already have tried all this, disregard...good luck
coxbros1 wrote: ↑Tue Feb 18, 2020 10:56 am
Decent piece! I know its sounds like alot but go to servo speed (if u havent already) and back the throttle side down to 50% or lower, u will be amazed....once u find the right %, prolly in the 30% range, u will be able to dead hook that car. Not sure what servo u got, but slowing the servo speed down on the steering, say to 75%, will calm ir down on the big end. If u already have tried all this, disregard...good luck
Dude one of the pro's told me exactly this...................................
I was never one to read the instructions for the transmitter my mistake.................... should be an interesting race in march unfortunately no more TNT's till October...
Visit Nostalgic RC in the business section or @nostalgicrc on Facebook for your custom RC10DS parts
Gone: RC10, Jrx-2 and Jrx-t
Current: 3 SC10 first gens, 3 SC10 Street Outlaw's, 12 RC10 DS’s, Carbon RC10T, RC10LSS,RC10L, RC10 Graphite,RC10 B44
No luck saturday at the SDRA RC DRAGS race 1 'Winternationals', the ProStock Camaro red light loss in round 2 and the Street Outlaw car was #1 qualifier but lost in the semi finals......................
On one of the passes traction was so good it popped a wheelie out of the gate let off the throttle got back on it and popped another wheelie, that was with the punch turned down
Short video of my ProStock RC10DS & Street Outlaw SC10:
Mid motor has been the thing here in the PNW racing scene for the last few months. While it's awesome to see some innovation in the R/C industry, I still am not sold on most of the current kits. Having owned almost every major brand...
Last post
From a serious carpet racer who made most carpet A finals in the Uk including British championships feel the same way, lost the passion since the B2/3 got replaced. It really was and still is a fun drive so am going to have these bits from you when...
So I have the Drawer liner to get the right pattern, but I want to add a twist.
Yellow weave/Carbon Kevlar!
Looking for something like this:
So, Im trying to locate something that will give me a fine line, instead of squares . I was thinking...
Last post
Hummm too hard for my taste.
I stick to
Tamiya Smoke 2-3 coats
Ductape Brand Carpet Tape
back it with silver paint or silver vinyl
^^ it even gives you this reflective shine in the sun.