So what did you get in the post today ???

When it's R/C related, but doesn't fit anyplace else.

Moderators: scr8p, klavy69

User avatar
Lavigna
Super Member
Posts: 1317
Joined: Wed Aug 05, 2015 8:24 am
Location: Petaluma, CA
Has thanked: 839 times
Been thanked: 1090 times

Re: So what did you get in the post today ???

Post by Lavigna »

romulus22 wrote: Fri Sep 15, 2023 7:50 pm I completely forgot I bought this

2A35A602-AE48-454F-9C7B-B0A5CF9D97B8.jpeg
Very cool. Is this kit still being made?

User avatar
romulus22
Super Member
Posts: 2513
Joined: Wed May 19, 2010 11:30 pm
Location: KY
Has thanked: 807 times
Been thanked: 717 times

Re: So what did you get in the post today ???

Post by romulus22 »

Incredible_Serious wrote: Fri Sep 15, 2023 11:23 pm
romulus22 wrote: Fri Sep 15, 2023 7:50 pm I completely forgot I bought this

2A35A602-AE48-454F-9C7B-B0A5CF9D97B8.jpeg
How much do you have to drink to forget making a purchase like that????

Honestly, inquiring minds want to know.... so I know where my cutoff point should be! :P :lol: :oops:
It’s not alcohol, it’s called aging. I’m losing my memory quick. And the fact it was pre-ordered nearly 6 months ago.
Lavigna wrote: Sat Sep 16, 2023 4:09 am
romulus22 wrote: Fri Sep 15, 2023 7:50 pm I completely forgot I bought this

2A35A602-AE48-454F-9C7B-B0A5CF9D97B8.jpeg
Very cool. Is this kit still being made?
A little late to reply you may have already checked it out. But I believe it is.

https://grandprix3d.store/products/rc10-91-detroit-worlds-replica-conversion-kit

User avatar
morrisey0
Super Member
Posts: 1466
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 64 times
Been thanked: 1449 times

Re: So what did you get in the post today ???

Post by morrisey0 »

Built, never run, Traxxas Eagle. One little mark on the top of the chassis, and a couple of flat tires. Protective clear cover on the bottom :?:


EAGLE 1.jpg
EAGLE 2.jpg
EAGLE 3.jpg
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

BattleTrak
Super Member
Posts: 678
Joined: Mon Oct 07, 2019 3:33 am
Location: Ill-Noise, USA
Has thanked: 974 times
Been thanked: 566 times

Re: So what did you get in the post today ???

Post by BattleTrak »

A LXT manual. Hopefully that’s a coffee stain on the front and not vomit…

Image
-Brad

User avatar
Incredible_Serious
Approved Member
Posts: 3496
Joined: Tue Jan 29, 2008 5:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1513 times
Been thanked: 943 times

Re: So what did you get in the post today ???

Post by Incredible_Serious »

Picked up a 'junk' lot today..... this is all that was included:
20230918_102054.jpg
Some 1:12 action...
20230918_102135.jpg
A rough Tamiya Holiday Buggy
20230918_102204.jpg
Some toy-grade rarities
20230918_102246.jpg
Nice radio gear here.... full-fruit T3PG-E transmitter and all
20230918_102233.jpg
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!

keyesgood
Approved Member
Posts: 33
Joined: Sat Dec 28, 2013 8:14 am
Location: Melbourne
Has thanked: 1 time
Been thanked: 4 times

Re: So what did you get in the post today ???

Post by keyesgood »

CON2 wrote: Tue Oct 09, 2012 10:37 am Losi xx.
Losi xxxt Matt Francis.
Worming tablets for the goats. :lol:





nice truck , still plenty od spares around for the xxxt trucks,

User avatar
morrisey0
Super Member
Posts: 1466
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 64 times
Been thanked: 1449 times

Re: So what did you get in the post today ???

Post by morrisey0 »

Incredible_Serious wrote: Mon Sep 18, 2023 4:28 am Picked up a 'junk' lot today..... this is all that was included:
I am just in awe of about 80% of what is in those pics! That is a crazy score!! :shock:
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

User avatar
Incredible_Serious
Approved Member
Posts: 3496
Joined: Tue Jan 29, 2008 5:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1513 times
Been thanked: 943 times

Re: So what did you get in the post today ???

Post by Incredible_Serious »

morrisey0 wrote: Mon Sep 18, 2023 11:46 pm
Incredible_Serious wrote: Mon Sep 18, 2023 4:28 am Picked up a 'junk' lot today..... this is all that was included:
I am just in awe of about 80% of what is in those pics! That is a crazy score!! :shock:
Thanks mate.... sometimes the good score gods smile on you...

Of course, this is about six months after I traded / sold all my new 1:12 mounted foams to suit the Associated 1:12.... dagnammit.
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!

User avatar
morrisey0
Super Member
Posts: 1466
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 64 times
Been thanked: 1449 times

Re: So what did you get in the post today ???

Post by morrisey0 »

Tami Stadium Blitzer, plus some needed parts. Thought it was old, then thought it was new, now kinda thinking it is old again.
Attachments
BLITZER 1.jpg
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

User avatar
juicedcoupe
Super Member
Posts: 3121
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 242 times
Been thanked: 1850 times

Re: So what did you get in the post today ???

Post by juicedcoupe »

morrisey0 wrote: Tue Sep 19, 2023 7:30 pm Tami Stadium Blitzer, plus some needed parts. Thought it was old, then thought it was new, now kinda thinking it is old again.
Originals have "The Falcon" in the tub, at the battery tray. New ones don't, just the part number.
Screenshot_20230919_151042_Gallery.jpg
Always looking for new and interesting ways to waste money.

User avatar
morrisey0
Super Member
Posts: 1466
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 64 times
Been thanked: 1449 times

Re: So what did you get in the post today ???

Post by morrisey0 »

juicedcoupe wrote: Tue Sep 19, 2023 8:13 pm Originals have "The Falcon" in the tub, at the battery tray. New ones don't, just the part number.
Thanks! That is a nugget of knowledge I haven't been able to find in my limited research. Of course, if you have an original, the tub got the grunt of the damage, and becomes the first thing you replace. And with that, your evidence is gone! :D But, via this test, mine is an original! :P The last parts that got me back to thinking it was original were the steering knuckles. They are the only white pieces on the whole vehicle, and they look like they have aged 30 years compared to 13. The knuckles are a bit worn on the bottoms, but I think I am going to keep them as they show a little age.
Attachments
BLITZER 2.jpg
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

User avatar
juicedcoupe
Super Member
Posts: 3121
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 242 times
Been thanked: 1850 times

Re: So what did you get in the post today ???

Post by juicedcoupe »

morrisey0 wrote: Tue Sep 19, 2023 10:51 pm
juicedcoupe wrote: Tue Sep 19, 2023 8:13 pm Originals have "The Falcon" in the tub, at the battery tray. New ones don't, just the part number.
Thanks! That is a nugget of knowledge I haven't been able to find in my limited research. Of course, if you have an original, the tub got the grunt of the damage, and becomes the first thing you replace. And with that, your evidence is gone! :D But, via this test, mine is an original! :P The last parts that got me back to thinking it was original were the steering knuckles. They are the only white pieces on the whole vehicle, and they look like they have aged 30 years compared to 13. The knuckles are a bit worn on the bottoms, but I think I am going to keep them as they show a little age.
It was something that I happened to notice. Three of mine have original tubs and two are new.

If the axles themselves are what's worn, they can be pressed out. The axle shaft is the same as the much cheaper Lunchbox axles. Just swap them out.
Always looking for new and interesting ways to waste money.

BattleTrak
Super Member
Posts: 678
Joined: Mon Oct 07, 2019 3:33 am
Location: Ill-Noise, USA
Has thanked: 974 times
Been thanked: 566 times

Re: So what did you get in the post today ???

Post by BattleTrak »

Another servo mount ESC for the collection.. An Acoms AT-5. I’ll probably start a thread about these soon.

Image
-Brad

Retro rc
Super Member
Posts: 574
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 600 times
Been thanked: 439 times

Re: So what did you get in the post today ???

Post by Retro rc »

juicedcoupe wrote: Tue Sep 19, 2023 8:13 pm
Originals have "The Falcon" in the tub, at the battery tray. New ones don't, just the part number.

Screenshot_20230919_151042_Gallery.jpg
Yay had to wipe of some dust but looks like I have an original aswell
IMG_5813.jpeg

User avatar
XLR8
Approved Member
Posts: 3102
Joined: Sun Feb 19, 2017 8:46 am
Location: north/central Alabama
Has thanked: 1410 times
Been thanked: 1002 times

Re: So what did you get in the post today ???

Post by XLR8 »

I'm always shopping for cheap used junkers on ebay (emphasis on "cheap") but I've never had one arrive like this.

P1010244.JPG

The description says "RTR" and the seller was right. Batteries in transmitter, lipo in car, charged and plugged in!

P1010245.JPG

:shock:

I literally switched it on then drove it around on the driveway.
Doug

  • Similar Topics
    Replies
    Views
    Last post

Return to “R/C Off-Topic / Chit-Chat”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot] and 0 guests