I had this chassis forever one of the 1st graphite from Andy's. I don't think it was made for the RC10T maybe for a buggy, but everything lined up so I just swapped everything over from the RC10T I won on ebay awhile back.
I used the proto parts I...
Besides the kiddo's T3 build, I haven't really built ANYTHING in months :roll: :oops: :lol: so as some of you know a custom 10T-X is on the bench :mrgreen: I have a pretty good idea of what I want to build, just have sort out all the parts for it....
Last post
P1050515.JPG
By placing the mounts in the flat section in front of the angled up sides you have a narrow zone that will take all the stress.I suggest you add a link between the sides of the mount and chassis sides.
I hope you can make the body...
Hey all. Here goes another build thread. Awhile back I was lucky enough to buy a new Andy's RC10T chassis. I don't know much about them, but they seem to be made of some kind of graphite material. The rear layout of the chassis allows you to run...
Last post
Did you ever finish this build?
Not yet. I just need to decide on wheels/tires and what body.
Question, Will the Andy's SODA series body for the Losi XXT fit the RC10T Without any custom trimming? I know, I know, Losi on a AE :( But I got access to one and a 10T body is hard to come by this cheap. I want it but don't want to ruin a good body...
Last post
Nice Mig,yer little buddy design that one too. :lol:
:lol: yes, he is a 3 year old time traveler and a genius with the air brush. :lol:
This is an original Andy’s body design and paint job. :D the problem is that it is a Losi XXT body and i...
here are my latest 2 rc cars, any info is super appreciated on them .
bought it from a sponsored driver. is it the real deal? what motor plate would look correct?
another truck missing the tranny
input, info, opinions as to what they are,...
Last post
Bid got it for 66.00 plus shipn no protector film has some marks from sitn on things but barely see it in the light.Put all rpm green fasteners on it and shock spring holders,need the adjustment clamps in green to match up.DON
This is my Andy's Build. Trying to use as much Andy's as I can on this build. Still missing a few pieces.
Last post
Protech IV looks great on there. If you are planning to run it, the wing might get bent kinda easily with the narrow mounting pattern. You could use the outer set of holes to be more stable. For the shelf, it will be just fine.
so, highwayracer was selling this andy's onroad prototype chassis.
andys%20oval%20car.jpg
the first night i saw it, it thought it was pretty cool. i sat there for a little while thinking of ways to finsh the car off, then moved on. the next...
Last post
Andy's steringknuckles with metal inserts for the kingpins would fit the project well (They are for the optima but fit the 870C too)
I know there is a lot of Team Associated history buffs here, so I ask the question, what is Andy's story?
What's so different in the Andy's arms? Also, I have seen the rare Andy's chassis, what's up with that too?
Last post
They are the prepainted bodies hanging on an endcap inside the store. I dont know if you can do any ordering (like that) from their website, but an e mail never hurt.
