My new project. I just picked-up this small lot over the weekend , it was listed for $50 on Craiglist. The buggy is in pretty good shape and just needs a good cleaning. Looks like the off-road tires were not used , also came with a wing and I believe the sway bars. I am starting to build-up quite a collection of radio and chargers. Since all you really need is one charger and radio I am curious what you guys are doing with the extra equipment?
Extra stuff...ebay if you like to deal that way or drop some of it in the B/S/T area. Some of these guys like the old stuff . Looks like a nice setup for the money though. Congrats on a decent deal.
Todd
Peace and professionlism.....Kabunga signing off!!!
Had a chance to some cleaning , found a lot of grey fur wrapped around the axles . On closer inspection some critter may have took some payback on the front foams.
Sway bar problem fixed with a paper clip , just have to order a body from Tower to finish the build. Time to put the foams and bumper back on and take a spin
Hi fellas, I recently purchased a lot of good deals on RC10s thru Ebay. I had really good luck finding mint stuff at reasonable prices. In the aftermath of all the extra parts I ended up with plus some extra used chassis I had from my previous...
Last post
Hmmmm
I have an old Tamiya Monster Beetle body at home. Perhaps i should try to build one of these fo playing around..
I recently picked this up from a FB post after wanting a 10T since the 90's. Plan is to go through it and get it running on modern electronics.
z_IMG_3343.png z_IMG_3344.png z_IMG_3348.png
It looks like an RTR to me that someone has been...
Last post
front bumper looks rpm sc10t-ish...or traxxas rpm slash. picture really isn't good enough for me to see it straight on so its guessing.
As I mentioned in the intro post, I got this car for $50 from the previous owner who turned out to be a meth addict, so i probably saved it from a worse fate.
I had it sitting in storage for 10-15 years and dug it out. Reasons for digging it out...
The overall plan is to incorporate a mix of classic, world's, aftermarket and vintage parts
Here's a look at the chassis
Parts
Team Associated RC10 World's Car Kit - 6002
JConcepts Aluminum RC10 Steering...
Last post
Do you find that the dhawk rear bulkhead stiffens up the rear end of the chassis? The nylon bulkhead allows some flex in the rear, so curious if the aluminum bulkhead solves that.
Since this is the first and only RC10 I've ever built, I am unable...
Here are some pictures of my current RC10 project. I'm building it like the one I had as a kid, but with some upgrades that I couldn't afford back then. 2010-09-25_17-43-21_627.jpg DSCF2614.jpg DSCF2616.jpg DSCF2680.jpg DSCF2682.jpg DSCF2686.jpg
Last post
Here's a updated picture with the Composite Craft chassis.
One of the Tecnacraft rear axles can be seen in this picture.
I know it's too late to attempt to do the box art RC10 since I started just 2 years ago and collecting what's needed for the project.
Anyway, I would like to share my RC10 which is like any other RC10's here. :wink:
The car still need to be rebuilt,...
Last post
Thanks, I've kept buying that I needed for my box art project and tossed it on my bin box through the years. I was surprised I got too many of some of the items. I don't mean to be greedy just did'nt had the time to check what I already have....
Hello, I am a new member on this forum and write from Spain. I have several RC cars and i love old school offroad racing cars. 90's decade cars are my favorite. Associated cars is my favorite. I runed several races in 90's with a rc10 b2 and then b3...
Picked up this lightly used b2 roller that I tore down cleaned up and added new front tower and new rear tires and bearings to the steering. I will replace some other parts as I go as well as some of the hardware.
Last post
That LRP is sweet. I'd love to find one someday. Novak Hammers seem hard to find now as well.