RC12I racer

[a01butal]

Wow Bill, that's quite a rig. Especially like the Litesink motor mount. Looks like you still have the front tire issue, maybe you're going too fast.

[clinehobbies]

Wow Bill, that's quite a rig. Especially like the Litesink motor mount. Looks like you still have the front tire issue, maybe you're going too fast.

I quailied 1st, set fast lap and won the main this time out. with the new graphite chassis, litsink motor mount, Toj Body, and some sorting of the rear damper and radio tray stand-offs the car handled like it was on rails. Tire wear was still an issue, I had to watch how hard I pushed the car in the big sweepers for the first 3 mintues to conserve the fronts but I was able to finish each round on some rubber. you can see just how hard the carr and track was on the front left tire in the pictures. The wear is after only one run. Thanks Al for all the parts that helped me get my old junker 12I flying around the track.

Bill C.

[a01butal]

Bet that blew their minds William. Glad to see you still can drive, all you have to do is conserve your machinery until near the end and then let it go all out. At least that's what I keep telling Dale Jr.