lunsford titanium
Re: lunsford titanium
keep in mind that stainless really likes to back out on you. they are too slick and will work themselves free.
at the end of the day nothing beats black oxide steel, tougher then most and slightly grippy.
at the end of the day nothing beats black oxide steel, tougher then most and slightly grippy.
- DMAT
- Approved Member
- Posts: 885
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 4 times
Re: lunsford titanium
These arent going onto a runner. Its a show car, otherwise id just buy the much cheaper steel ones.
- DMAT
- Approved Member
- Posts: 885
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 4 times
Re: lunsford titanium
Thought id give an update on this.
Got the titanium set. Everything appears to be there albiet im not sure if I got the #8 screws. There are about 15 different types of screws of varying length. My only gripe is the finish is no where near what was expected. Its not polished in any such way, Not blackish like hardened steel but no where near the finish of stainless steel.
Got the titanium set. Everything appears to be there albiet im not sure if I got the #8 screws. There are about 15 different types of screws of varying length. My only gripe is the finish is no where near what was expected. Its not polished in any such way, Not blackish like hardened steel but no where near the finish of stainless steel.
-
- Approved Member
- Posts: 695
- Joined: Fri Mar 08, 2013 5:31 am
- Location: UK, Surrey
- Been thanked: 1 time
Re: lunsford titanium
That is normal. There is no finish to ti. It is bare natural material. Lovely it its own subtle way. If you want bling then it is not the material of choice.
GARBO 1/8
- DMAT
- Approved Member
- Posts: 885
- Joined: Wed Mar 20, 2013 8:53 am
- Location: Baton Rouge, La
- Been thanked: 4 times
Re: lunsford titanium
yea....I was really wanting a polished silver look. I'll figure something out probably.tommy2c wrote:Unless you get it anodized
-
- Approved Member
- Posts: 695
- Joined: Fri Mar 08, 2013 5:31 am
- Location: UK, Surrey
- Been thanked: 1 time
Re: lunsford titanium
Maybe you should go for stainless steel or anodised alloy. Then sell your ti bits to me for a discount 
Ti is not anodised because it does not need a protective surface as it does not corrode. Anodising gets scratched off anyway.

Ti is not anodised because it does not need a protective surface as it does not corrode. Anodising gets scratched off anyway.
GARBO 1/8
Re: lunsford titanium
It can be though. Done a lot in the medical device industry. Pretty much all the titanium medical devices we manufacture for customers have an anodizing requirement
- jwscab
- Approved Member
- Posts: 6571
- Joined: Wed Jan 28, 2009 9:42 am
- Location: Chalfont, PA
- Has thanked: 16 times
- Been thanked: 498 times
Re: lunsford titanium
yeah, titanium is still a reactive metal, so it will still oxidize. medical and military applications do have special coatings, ie, anodized or other coatings to protect and sometime help with dissimilar metal problems.
you can polish the bare titanium though, it will come up and shine nicely, but nowhere near chrome. Ti has it's own luster.
you can polish the bare titanium though, it will come up and shine nicely, but nowhere near chrome. Ti has it's own luster.
-
- Approved Member
- Posts: 695
- Joined: Fri Mar 08, 2013 5:31 am
- Location: UK, Surrey
- Been thanked: 1 time
Re: lunsford titanium
^
Edit: ok learned something new.
I have seen coloured ti. Back in the 1990s it was fashionable to have MTBs fitted with shocking purple ti screws. But of course it is pointless with ti as it does not need protecting, unlike aluminium. The beauty of ti is that if you scratch it you can buff it out and it leaves no marks at all. But whatever makes you happy!
Edit: ok learned something new.
I have seen coloured ti. Back in the 1990s it was fashionable to have MTBs fitted with shocking purple ti screws. But of course it is pointless with ti as it does not need protecting, unlike aluminium. The beauty of ti is that if you scratch it you can buff it out and it leaves no marks at all. But whatever makes you happy!

GARBO 1/8
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 2269 Views
-
Last post by Y'ernat Al
-
- 7 Replies
- 1273 Views
-
Last post by teman
-
- 1 Replies
- 695 Views
-
Last post by justinspeed79
-
- 0 Replies
- 743 Views
-
Last post by frgna
-
- 1 Replies
- 559 Views
-
Last post by GoMachV
-
- 11 Replies
- 1639 Views
-
Last post by GoMachV
-
- 3 Replies
- 544 Views
-
Last post by jwscab
-
- 25 Replies
- 2065 Views
-
Last post by RichieRich
Who is online
Users browsing this forum: No registered users and 4 guests