DONATION TIME 8 YR OLD BOYs project gift Rustler!UPDATED!!!

[THUNDERSTRIKE1]

After typeing the last post my sugar dropped while looking up the bearings size needed since NOONY provided me with the original manual to the truck too.I checked my sugar level,it was 48 !!! I guess i took to much insulin for what i ate earlier but fine now.The size is 5x8x2.5OB FOR ALL 13 BEARINGS.Whoever can order these pm me for my address and to give me yours to mail back the money order to reimburse you.thanks don

[THUNDERSTRIKE1]

Well i received some spare tranny gears and case halves and servo and esc misc.Spur gearsa and slippers but appears they not the ones needed.Their for a savage.Oh and extra slider shafts and rear axles,case they break them. Still need rest the list.He will be coming home shortly so need getm done.DON

Big THANKS TO ANDYMAC AT CLODTALK.COM

[THUNDERSTRIKE1]

DID find slipper eliminater but hesitant to use on the boys car scared eat up the gears with forward and reverse slamming .Did find extra spurgear with new truck so got that. still needing the bearings and rear hubcarriers and front uprights.Will get the part numbers in a sec. don

[85Edinger]

That can't be right. I thought the gearbox used 6 5x11bearings and the 5x8s in the wheels.
The 5x8s are famed for exploding. If you want, I can add a set of 5x11 hubs to my donation.

[klavy69]

DID find slipper eliminater but hesitant to use on the boys car scared eat up the gears with forward and reverse slamming .Did find extra spurgear with new truck so got that. still needing the bearings and rear hubcarriers and front uprights.Will get the part numbers in a sec. don

Keep that slipper eliminator for your parts . Got the hex clutch assy sitting here for you. Should have rear hubcarriers and front uprights also. Just need to figure out what 85edinger is sending so I don't have to keep looking and get these sent out to you...

Todd

[THUNDERSTRIKE1]

I DONT HAVE ANY INFO cept what i put on this thread.Im going by the original manual parts number and bearing sizes.These big bearings came out grasshopper rearend and some i had in rc10truck conversion wheels on the shelf.Some parts ive had for years and some stuff swapped from my own cars to hurry up and get this completed.lol Dang part numbers are so small and lightly printed hard to tell what it says.Need new glasses bad.don

[klavy69]

got:
-a set of rear carriers and bearings (5x11)
-a set of ft/rr 2.2 wheels if you still need them
-hex clutch assy

maybe have front uprights but don't have anything to compare them too. Pry have the rest of what you need also except the front upper support. Will keep digging and check your list again...

Todd

[85Edinger]

How about you send the wheels, slipper clutch, and rear hub carriers while I send caster blocks, front bumper, 2 front 5x11 hubs with bearings, axles, and hexes, and a complete turnbuckle set including 4 camber links and 2 toe links.
One of my front hub carriers is broken, though.
I can also throw in pretty much any hinge pin or screw that might be needed.

[THUNDERSTRIKE1]

{I love it when a plan comes together} COOL Guys!!! don

[85Edinger]

What about the chassis top plate?

[THUNDERSTRIKE1]

Guess im a haft to go 90 miles to get one and the bellcranks and fasteners for it,plus the two sets of slipper plugs.Since the new Rustler only had 6 in the spur gear.Im making the battery brace and rear battery brace out graphite chassis pieces.Not sure how much a body is gonna be,Cant spend much getn cash low now from bills.So i need to get to posting more rcs for sale too.don

[klavy69]

I got extra slipper plugs so they are taken care of and the steering assy also. What do you need besides body? what brace are you talking about?

Todd

[THUNDERSTRIKE1]

The front battery strap/brace and the plastic screw on part that rep;aces the esc standoff thingy.Awsome to hear about the slipper plugs.Don

[klavy69]

plastic screw on part that rep;aces the esc standoff thingy

Don,
I'm gonna give you a big on this. You need the esc plate that bolts to the chassis?
package is ready and waiting to hear from you...

Todd

[THUNDERSTRIKE1]

I made that part out carbon weave plate and the battery strap thing.Ive replaced the parts sent by DMAT ONTO ONE TRUCK TO UPDATE THE BEARING SIZE.Been at hospital almost all afternoon with my daughter their gonna send her to Duke again.Wonder how long this time.90 miles a day every dang day.don