yokomo clearance from original distributor.

The place for all things Yokomo.

Moderators: scr8p, klavy69

upforit365
Approved Member
Posts: 79
Joined: Mon May 07, 2012 1:12 pm
Location: West London, UK
Been thanked: 1 time

Re: yokomo clearance from original distributor.

Post by upforit365 »

If you are willing (and there are any left)I would be very keen to get my hands on a set of zc407a arms.

Totally understand if you can't or other members get in before me. As mentioned previously everyone on here surely appreciates you doing this for forum members.....:)

aip47-2008
Approved Member
Posts: 1186
Joined: Sun Feb 08, 2009 9:20 pm
Location: Spokane, WA
Has thanked: 135 times
Been thanked: 23 times

Re: yokomo clearance from original distributor.

Post by aip47-2008 »

He was there yesterday, but someone took all 20 or so sets of suspension arms along with most everything else offroad Yokomo. Lots of touring car parts left.

User avatar
DennisM
Approved Member
Posts: 2403
Joined: Sun Feb 26, 2012 7:07 am
Location: Denmark
Has thanked: 30 times
Been thanked: 64 times

Re: yokomo clearance from original distributor.

Post by DennisM »

I guess Surferdude runs his Yoke´s real hard :mrgreen:
Gone fishing

alien3t
Approved Member
Posts: 589
Joined: Wed Oct 03, 2012 2:17 am
Location: Murrieta, California

Re: yokomo clearance from original distributor.

Post by alien3t »

there may be a couple magnesium front bulk heads, i left with maybe 1 or 2 last night, and i think i picked up the last of the aluminum bulkheads for someone else. only tcs parts there are were a couple pullys, some shafts and the slipper pads, but i already grabbed those for other members. there was a ton of front arms, mixed with some 97 towers and yrf2 stuff, but those are completly gone. anything grapfhite for a yz-10 already gone. only thing really for ya left are 501 diff sets, the linkage sets, front steering tie rods and the ball cups. 433 aND 432 WHEEL HUBS. AND A FEW YRF2 AND MR2 TID BITTS.

ther is still soem mr4tc parts. and a few i think bmx4 or bmaxx 4 parts. or something and some gt4 or yr4 nitro chassis and parts.

but belts, most are gone. they used ot have so many tires and belts. most were cut up and tossed. and wheels. definatly noen.
But i will keep checking apparently there might be more stuff upstairs. so after today. i might still do drop bys see if anything new popped up. cause some stuff i found last night was not there friday when i dug through it all.

Surfer dud was smart. this stuff has been on clearance for well over a month. but there wasnt so much off road stuff int he tubs then. and i didnt know. HE jumped in quick and 1 other person in orange county. they were smart and grabbed early.

MY cell is 714-488-5281 can text or call. all the people i have helped actually have paypaled me first. and i used there money. from my paypal. since i do not have the cash to upfront alot. they are gettign there itemized recipts with there stuff. so they all know i am not making a penny off anyone. But today might be the last day i go for a week.

User avatar
DennisM
Approved Member
Posts: 2403
Joined: Sun Feb 26, 2012 7:07 am
Location: Denmark
Has thanked: 30 times
Been thanked: 64 times

Re: yokomo clearance from original distributor.

Post by DennisM »

I think You´re a top notch fellow enthusiast 8)
Gone fishing

flustorm99
Approved Member
Posts: 188
Joined: Mon Dec 16, 2013 4:23 pm
Location: Canberra, Australia
Been thanked: 1 time

Re: yokomo clearance from original distributor.

Post by flustorm99 »

No worries, who grabbed all 20 sets? Greedy s......mate if there is anything at al i mentioned lemme know and tell me cost and happy to pay upfront

User avatar
LTO_Dave
Approved Member
Posts: 1725
Joined: Tue Mar 03, 2009 3:33 am
Location: Rossiter, PA
Has thanked: 46 times
Been thanked: 225 times

Re: yokomo clearance from original distributor.

Post by LTO_Dave »

So is this the same seller who has been unloading all the cheap Yokomo stuff on ebay lately? Or is that person the one who bought all the parts from the store you're talking about and reselling them on ebay?

I'm interested in any YR-4M2/Pro/Type J and MX-4 parts if there's any available. The red aluminum touring car shock sets would be especially nice to get. :wink:

alien3t
Approved Member
Posts: 589
Joined: Wed Oct 03, 2012 2:17 am
Location: Murrieta, California

Re: yokomo clearance from original distributor.

Post by alien3t »

Well fond the missing boxes, and 7 more of stiff that hadnt hit the floor yet. What i picked up. Hopefully the people will display thier piles of new stuff. My 870c is now turning into a 93. Almost.

aip47-2008
Approved Member
Posts: 1186
Joined: Sun Feb 08, 2009 9:20 pm
Location: Spokane, WA
Has thanked: 135 times
Been thanked: 23 times

Re: yokomo clearance from original distributor.

Post by aip47-2008 »

alien3t wrote:Well fond the missing boxes, and 7 more of stiff that hadnt hit the floor yet. What i picked up. Hopefully the people will display thier piles of new stuff. My 870c is now turning into a 93. Almost.
8)

alien3t
Approved Member
Posts: 589
Joined: Wed Oct 03, 2012 2:17 am
Location: Murrieta, California

Re: yokomo clearance from original distributor.

Post by alien3t »

I did pick up for my self th-1 rear hubs that fit associated. There was 1 set left. $2.15. For future nix91 project.

flustorm99
Approved Member
Posts: 188
Joined: Mon Dec 16, 2013 4:23 pm
Location: Canberra, Australia
Been thanked: 1 time

Re: yokomo clearance from original distributor.

Post by flustorm99 »

So any stuff in my list mate?

flustorm99
Approved Member
Posts: 188
Joined: Mon Dec 16, 2013 4:23 pm
Location: Canberra, Australia
Been thanked: 1 time

Re: yokomo clearance from original distributor.

Post by flustorm99 »

So is ot surferdude who bought the sus arms for $2 and now flogging them for $40 a set..1900% markup...pfffft

User avatar
Vale
Approved Member
Posts: 369
Joined: Tue Jul 24, 2012 5:13 pm
Location: Luxemburg
Has thanked: 2 times
Been thanked: 3 times

Re: yokomo clearance from original distributor.

Post by Vale »

flustorm99 wrote:So is ot surferdude who bought the sus arms for $2 and now flogging them for $40 a set..1900% markup...pfffft
Is surferdude a member here? Saw his parts on ebay, asked for shipping to Luxembourg and got no feedback...

User avatar
klavy69
Moderator
Posts: 5151
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 568 times
Been thanked: 268 times

Re: yokomo clearance from original distributor.

Post by klavy69 »

Vale wrote:
flustorm99 wrote:So is ot surferdude who bought the sus arms for $2 and now flogging them for $40 a set..1900% markup...pfffft
Is surferdude a member here? Saw his parts on ebay, asked for shipping to Luxembourg and got no feedback...
if you need a person in the US to relay it to you drop me a pm with some info. 8)

Todd
Peace and professionlism.....Kabunga signing off!!!

User avatar
Vale
Approved Member
Posts: 369
Joined: Tue Jul 24, 2012 5:13 pm
Location: Luxemburg
Has thanked: 2 times
Been thanked: 3 times

Re: yokomo clearance from original distributor.

Post by Vale »

klavy69 wrote:
Vale wrote:
flustorm99 wrote:So is ot surferdude who bought the sus arms for $2 and now flogging them for $40 a set..1900% markup...pfffft
Is surferdude a member here? Saw his parts on ebay, asked for shipping to Luxembourg and got no feedback...
if you need a person in the US to relay it to you drop me a pm with some info. 8)

Todd

Hi Todd,

That's good to know, thank you :)

Daniel

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • How coll when a modern distributor remembers old school
    by purpletimbo » » in Off-Topic / Chit-Chat
    3 Replies
    359 Views
    Last post by call-911
  • My original race car - Yokomo Works 91 (i think?)
    by dinglem » » in Yokomo Forum
    18 Replies
    4128 Views
    Last post by Chancentod
  • Clearance table finds
    by SteveK » » in RC10 Buggy Forum
    10 Replies
    893 Views
    Last post by RC10resto
  • Walmart Canada clearance
    by 328isjohn » » in R/C Off-Topic / Chit-Chat
    1 Replies
    1175 Views
    Last post by Coelacanth
  • Bellcrank to body clearance: TRX-1
    by TRX-1-3 » » in Traxxas Forum
    1 Replies
    897 Views
    Last post by Lonestar
  • RC10 Shock/Arm Clearance Question
    by limestang » » in Temple's RC10 Tech Forum
    4 Replies
    947 Views
    Last post by limestang
  • original, original, original RC10T tires from the ad.
    by atarit3 » » in RC10 Truck Forum
    8 Replies
    1571 Views
    Last post by atarit3
  • My Yokomo story.....Yokomo no 1..870c
    by flustorm99 » » in Yokomo Forum
    7 Replies
    1432 Views
    Last post by flustorm99

Return to “Yokomo Forum”

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot] and 7 guests