RC10 World's Re-release Revert Project

[JK Racing]

Here is a shot of a black original worlds rear bulkhead. I have taken my re-re rear bulkheads and done the cutting to make them appear the same, it is pretty easy/quick.



Here is a modded re-re rear bulkhead

[scr8p]

You should move the front body mount to the right steering bellcrank as well.

[shoman24v]

You should move the front body mount to the right steering bellcrank as well.

Here's a question. I thought about doing that, but, does the original world's have the hole in the nose plate too? If it does, I can definitely do that, I have the proper screw to do so.

[mikea96]

Yes the original does you can see it in the pic of mine on the previous page through all the dust!

[romulus22]

You should move the front body mount to the right steering bellcrank as well.

I don't have either sitting in front of me. But I do believe the manual shows it this way.

But I believe the side of the box shows the front post installed on the nose.

[scr8p]

Yeah your right, boxart has it on the nose. I never noticed that.

[shoman24v]

Do you guys have any pics of the box?

[mikea96]

I do give me a sec and i will take a couple!

[mikea96]

Here you go one of each side.

[mikea96]

Wheels are on.

Just need 1/4" rear wheels, the original rear tires (or something similar) and she should be ready for electronics and paint. I may take a stab at doing my own paint on this body, so we'll see.

Proline flat 80's are a similar looking tire they are what I have on my B2 here is a picture.

[shoman24v]

Those are definitely similar, are they bigger?

The original rear wheels still carry the same part no. as the new ones, just that they are 3/16" axle. I'd be fine with using that if those tires are pretty close?

[scr8p]

The old worlds wheels were 2.15. The part number is the same, but the rere wheels are more like b2/b3. 3/16" axles, 2.2 diameter.

[shoman24v]

The old worlds wheels were 2.15. The part number is the same, but the rere wheels are more like b2/b3. 3/16" axles, 2.2 diameter.

I had a feeling that was the case

[shoman24v]

Do you guys know if B2 universal axles will fit?

[mikea96]

Yes they will fit in have used them before.