Car#7 RC10DS Carbon Fiber Mid Mount Pro Stock "Featherweight"

[KidAgain]

Only gained about 1 mph and my et’s weren’t great no gains there, need to do better in the first 30 feet. My Street Outlaw car did not like the top end figured out rear shock tower was way loose and just rocked the car at high speed.

Next weekend more testing.




https://youtu.be/ZdsxNQD3WfI

[KidAgain]

Ran best mph so far @ 57.2 only got like 3-4 runs in this foam tire racing is time consuming with the tire prep but its fun..... 2 mph gains pretty good considering the only difference was timing up one level and turning the punch down 2 levels. Leaving the punch on kill caused the car to do a wheelie with the tire prep I did kind of surprised me , havent been better with the et's but close to my best so far needs more tuning..............







Video of runs:

https://youtu.be/SVXejq_0fhc

[coxbros1]

Got that DS hauling! Why does the other car flip at the finish?

[KidAgain]

Got that DS hauling! Why does the other car flip at the finish?

The videos before this last one was a bad outing, the rear shock tower was loose on the Outlaw car and would rock the car at the top end and just lose control and flip, in the latest video the flip was do to over correcting the steering. The Outlaw car is very sensitive to any steering input with the locked diff...........................Im not to savvy with the remote control features but was told to slow the steering rate down a bit so next time we will see...............................................

[coxbros1]

What transmitter you rockin?

[KidAgain]

What transmitter you rockin?

An old ass Spektrum DX3R I bought in 05

[coxbros1]

Decent piece! I know its sounds like alot but go to servo speed (if u havent already) and back the throttle side down to 50% or lower, u will be amazed....once u find the right %, prolly in the 30% range, u will be able to dead hook that car. Not sure what servo u got, but slowing the servo speed down on the steering, say to 75%, will calm ir down on the big end. If u already have tried all this, disregard...good luck

[KidAgain]

Decent piece! I know its sounds like alot but go to servo speed (if u havent already) and back the throttle side down to 50% or lower, u will be amazed....once u find the right %, prolly in the 30% range, u will be able to dead hook that car. Not sure what servo u got, but slowing the servo speed down on the steering, say to 75%, will calm ir down on the big end. If u already have tried all this, disregard...good luck

Dude one of the pro's told me exactly this...................................

I was never one to read the instructions for the transmitter my mistake.................... should be an interesting race in march unfortunately no more TNT's till October...

[KidAgain]

No luck saturday at the SDRA RC DRAGS race 1 'Winternationals', the ProStock Camaro red light loss in round 2 and the Street Outlaw car was #1 qualifier but lost in the semi finals......................

On one of the passes traction was so good it popped a wheelie out of the gate let off the throttle got back on it and popped another wheelie, that was with the punch turned down

Short video of my ProStock RC10DS & Street Outlaw SC10:

https://youtu.be/cLfWgeQQLMc


Full video of event:

https://youtu.be/g8Jav40eLUA

[KidAgain]

Updated the Cap Pack with one of these ANTI RIPPLE units...........

[n20capri]

Awesome! What rear axles are you using? Thanks

[KidAgain]

Awesome! What rear axles are you using? Thanks

Those are GPM aluminum axles made for the DS.............................

[n20capri]

Awesome! What rear axles are you using? Thanks

Those are GPM aluminum axles made for the DS.............................

Ahhh I was afraid of that - can't find them...Thanks!

[DropDeadKustoms]

I love this build! You nailed it! It's crazy how big the new drag cars are but I get it.

[KidAgain]

I love this build! You nailed it! It's crazy how big the new drag cars are but I get it.

For sure bud keeps me busy, I still run my off-road Associated cars also but the tracks here get busy.