Cliff Lett RC10ST (Team Moo) by Slotcarrod

[slotcarrod]

Fronts are alloy, rears aren't- but I can only magnify to 199%

If you look at the picture of the rear (the one with the left tire off) you can look at the inside of the right wheel at 200% and see a silver screw poking out. Don't use the image from the link I posted, you must down load the RCCA magazine to get a clear image!

[slotcarrod]

Update!

So thanks to scr8p's info http://www.rc10talk.com/viewtopic.php?f=38&t=21680, this is how I think the antenna was mounted on Cliff's truck!

I don't have the 410-M1c ESC to put in, and my blue wire on my mint 410-M1 is just a tiny bit short. I did not want to change the original blue wire, so I found this crusty 410-M5 that I got from Vintage AE. It's dirty, the wires are junk as is the switch, but I have a perfect Novak switch on that old Novak built blue Duratrax ESC! (Sorry about the poor pictures!)

I changed the 410-M5 from a 16g 4 wire to a 13g 3 wire ESC, and put in a new switch! The main heatsink has been narrowed just like Cliff's.

[vintage AE]

that esc was in rough shape, but looks great now. The trucks looking awesome!

[slotcarrod]

that esc was in rough shape, but looks great now. The trucks looking awesome!

No...You can't have it back! BTW, it works perfect!

Thanks VAE!

I added the FET for the VRG servo!

With all electronics installed and working perfectly! Ready for the body!

[scr8p]

antenna tube goes on the front side of the tower.

[slotcarrod]

antenna tube goes on the front side of the tower.

Doh!

You sure? Where the antenna hole is showing on the body, that would line up with the rear side! Unless he put a bend in the antenna???

You got any pics scr8p?

[slotcarrod]

Well, I put on the Associated chassis tape, and put the antenna on the front of the tower as per scr8p's suggestion!

Final pictures of the complete RC10ST just before it's virgin run!

[vintage AE]

looks sweet Rod!

too bad that last photo almost looks like an action pic...being on the top side of the turn, but the spotless and super clean tires give it away

BTW, I will be in town probably on Sunday or Monday. Maybe we could hit the track

[slotcarrod]

looks sweet Rod!

too bad that last photo almost looks like an action pic...being on the top side of the turn, but the spotless and super clean tires give it away

BTW, I will be in town probably on Sunday or Monday. Maybe we could hit the track

Thanks! I wish I had the Lavco, white Proline and other vintage stickers to make the body complete!

Has to be Sunday, I work Monday!

I have some action shots but Tiffany needs to download them off her camera!

[vintage AE]

K, I'll call ya when I will roll into town

[fakiee]

That looks amazing, I used to look at pics of this car in RC Car magazines when I was at school and wish my king cab could be as low sunk and cool looking

[Seabass]

Is that the body I painted??? It looks really good if it is.

Very nice truck man.

Jake

[slotcarrod]

Is that the body I painted??? It looks really good if it is.

Very nice truck man.

Jake

Yes it is Jake! Thank you very much, you saved me from what I hate the most... Painting!

I gotta get my Daughter to down load those action shots!

[slotcarrod]

No animals were harmed in the shooting of these photos, but there was some cow tipping involved!

RUN BUBBA RUN!

[Charlie don't surf]

Awesome!!!!!!!!!!!!!!!!!