YOKOMO YZ10 GEARING - 17.5 MOTOR - RC10Talk - The Net's Largest Vintage R/C Community

YOKOMO YZ10 GEARING - 17.5 MOTOR

Moderators: scr8p, klavy69

Post Reply

4 posts • Page 1 of 1

MIKE VALENTINE: Approved Member; Posts: 98; Joined: Thu Jun 17, 2010 2:29 pm; Location: TORRINGTON, CT - USA

YOKOMO YZ10 GEARING - 17.5 MOTOR

Quote

Post by MIKE VALENTINE » Mon Aug 16, 2010 4:20 pm

Any help with spur gear and pinion size for small indoor track, 17.5 brushless motor.
Thanks in advance

Brandon G: Approved Member; Posts: 2106; Joined: Mon Oct 01, 2007 4:23 pm; Location: Nashville, TN; Been thanked: 2 times

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Quote

Post by Brandon G » Fri Aug 20, 2010 12:23 pm

Mike, I wish I could help. Let me know what you come up with.

bscotti: Approved Member; Posts: 617; Joined: Fri Jul 14, 2006 9:48 am; Location: Freeville, NY; Been thanked: 1 time

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Quote

Post by bscotti » Fri Aug 20, 2010 7:41 pm

Mike, I ran 28-81 last year and that was pretty good.

Brian

Classics rule, moderns drool

MIKE VALENTINE: Approved Member; Posts: 98; Joined: Thu Jun 17, 2010 2:29 pm; Location: TORRINGTON, CT - USA

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Quote

Post by MIKE VALENTINE » Tue Aug 24, 2010 12:25 pm

Thanks bscotti, I'll start two teeth less than that and adjust. How hot was the motor arfter running 5 minutes?

Post Reply

4 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

Motor and gearing recomendation

Last post by m_vice « Thu Jan 07, 2010 9:47 pm
Posted in RC10 Buggy Forum
Replies: 4
by bennettj325 » Mon Jan 04, 2010 9:11 pm » in RC10 Buggy Forum

First post

Hey everyone, new guy to the forum. I, like alot of others on this forum found 'the box of parts' from my youth in the basement.

Needless to say I am doing a resto-mod on a gold pan rc-10. The pan was pretty beat so I painted it black and used...

Last post

I would go with a larger spur and a smaller pinion, specially if you are bashing. something like a 87/20, or lower pinion specially if you are using a 6 gear trany.

4 Replies

1153 Views

Last post by m_vice
Thu Jan 07, 2010 9:47 pm
Brushless motor gearing

Last post by daz_75 « Tue Jan 17, 2017 12:42 pm
Posted in Losi Forum
Replies: 6
by daz_75 » Fri Jan 13, 2017 3:34 am » in Losi Forum

First post

Putting and 8.5t Motor in my XX but no idea what pinion to use. Had a 17t on my brushed motor but that sounds low, any suggestions?

Last post

Thanks guys my brushed motor had a 17t pinion on it so will up that I think

6 Replies

1646 Views

Last post by daz_75
Tue Jan 17, 2017 12:42 pm
Gearing Down a Brushless motor!!!!

Last post by Stumpy « Thu Oct 30, 2008 5:42 am
Posted in Modern Electronics
Replies: 9
by tecnica2001 » Thu Oct 02, 2008 9:49 pm » in Modern Electronics

First post

Okie, I have a 17.5 motor and a 5.5 motor, both Novak Brushless, the guys at RCHR are running 8.5 and 10.5, I know if I use the 5.5 it'll be too much to handle on the track on a 2wd T4.

Can the 5.5 be geared down? Enough to compare to atleast an...

Last post

You dont say if you are running LiPo or NiMh cells but...

There is a local guy over here in OZ that regularly runs a 3.5 or 4.5 motor in his B4, but he also only uses 4 or 5 cells depending on the track conditions..

Just a thought..

9 Replies

1750 Views

Last post by Stumpy
Thu Oct 30, 2008 5:42 am
Motor timing and gearing

Last post by JK Racing « Sat May 26, 2012 11:53 am
Posted in Modern Electronics
Replies: 3
by jayman24 » Fri May 04, 2012 10:04 pm » in Modern Electronics

First post

I'm using a novak ballistic 13.5 turn motor. Gearing is 21 pinion 88 spur. I left the timing dial on the end bell alone. Its set at 30 degrees. But I have people getting past me in the straight a ways. Not terrible fast, but still getting by me....

Last post

I run 24/86 with a 10.5 in my XXXSCT, you definately need to put some more gear on there. Moving the timing will lower the torque a touch, it may feel mushy on the bottom end. Adjusting the gearing will also soften the torque a bit, but with a...

3 Replies

948 Views

Last post by JK Racing
Sat May 26, 2012 11:53 am
REVOLUTION motor gearing for JRX2

Last post by Bongo Fury « Tue May 18, 2010 10:34 pm
Posted in Losi Forum
Replies: 9
by Bormac » Mon Feb 08, 2010 1:17 am » in Losi Forum

First post

Hi Guys,
Ive got a Revolution motor (one of Losi's early mod's) and its a 16 triple. Can anyone provide me with a guide to what spur pinion combo would be good for this motor?

Last post

And today I found an another Team Losi Price List Effective 3/15/93. There were couple of differences: Jr's Choice was now 17*3 and Motown Missile 12*4.

Jirka
Interesting. So maybe I'm half wet! :wink: :mrgreen:

9 Replies

1999 Views

Last post by Bongo Fury
Tue May 18, 2010 10:34 pm
Keil gearing chart for RC10, RC10T and Yokomo Works

Last post by spru « Mon Jan 13, 2014 10:01 am
Posted in Vintage Catalogs / Instruction Manual Scans

by spru » Mon Jan 13, 2014 10:01 am » in Vintage Catalogs / Instruction Manual Scans

Here is a nice vintage Keil gearing chart for RC10, RC10T and Yokomo Works cars

Greetings
Raimund

0 Replies

1139 Views

Last post by spru
Mon Jan 13, 2014 10:01 am
Gearing question with my Reedy modified motor

Last post by carloco8 « Wed Mar 26, 2008 10:27 pm
Posted in Vintage Electronics
Replies: 9
by tbfoto » Wed Mar 26, 2008 5:17 pm » in Vintage Electronics

First post

Can anyone tell me what pinion gear I should use for this (6 gear transmission) buggy and motor. I have a 54 tooth spur gear on it. Also...how many turns is this modified motor. I thionk I heard once that it is a 12 turn?????? Is that correct? I...

Last post

I'd stick with the stock motor for now with a 11-12t pinion. Robinson racing makes them from 9-22t in 32 pitch. You can get them at tower if you need them:

9 Replies

1700 Views

Last post by carloco8
Wed Mar 26, 2008 10:27 pm
Gearing Advice for Stealth with B4 slipper and 10.5 motor

Last post by peetbee « Mon Dec 06, 2010 11:56 am
Posted in RC10 Buggy Forum
Replies: 10
by peetbee » Fri Dec 03, 2010 9:48 am » in RC10 Buggy Forum

First post

I've tried searching and couldn't seem to track down the answer.
So could anyone recommend what pinion to run on my 10.5?
I'm running the stealth box and the B4 slipper with 81t spur, also got 2.2 rims, any ideas?!
Thanks :D

Last post

Think I've got it sorted now.
I know what works on my B4 so have worked it backwards using:
spur divided by pinion multiplied by gearbox ratio = FDR

So I will be trying a 21t pinion with my 81t spur. :D

10 Replies

1467 Views

Last post by peetbee
Mon Dec 06, 2010 11:56 am

Return to “Yokomo Forum”

Who is online

Users browsing this forum: No registered users and 11 guests

YOKOMO YZ10 GEARING - 17.5 MOTOR

YOKOMO YZ10 GEARING - 17.5 MOTOR

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Re: YOKOMO YZ10 GEARING - 17.5 MOTOR

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online

Login Register