After a bit of searching, I'm still coming up short. Can anyone give me the original RC10 and B4 turnbuckle lengths? I'm going to use the 3.5mm set, and can't seem to find the proper info.
Short arm RC10 is 1.0 for the camber links and 1.35 for the steering links. The widetrack RC10 is 1.65 front camber, 1.35 rear camber and 2.0 steering. By memory the B4 are all 2.35 to 2.65 depending on the settings-
Does anyone know of a modern Titanium turnbuckle kit that I can use on an RC10 (stock wide front arms and stock rear arms) that I can still purchase and find replacement turnbuckles if I need to? I'll be using the innermost mounting points on both...
Last post
Actually, by the looks of it the front setup you have is what I could use too. So any idea what lengths all those lengths are or what you bought?
Sorry Keith, they're FT replacements for a CE or Team car. I've not measured them, they used to be...
I'm trying to piece together a tecnacraft kit and am unsure on sizes... was getting varied numbers and I'm nowhere near my truck either so no opportunity for me to measure.
Last post
Thnaks man! I found someone who has a bunch of loose tecnacraft so I'm trying to get them lengths so they can piece together a kit..
So I finally got my Graphite runner on the track yesterday, and ran my first lap in almost a decade... Got cocky pretty quickly in lap 2 and managed to completely snap a turnbuckle (right rear). The Dubro ends held up great, and everything else was...
Last post
That really depends on what color turnbuckles you want. Durability should be the same.
Building a mid motor oin RC10 and trying to figure out what dogbones I'll need. Mounting things a bit differently (trans in a slightly different spot/longer arms etc) so it's not as easy as swapping to a B4 bone for example (or maybe it is idk their...
Last post
Anyone have a chance to measure anything? Specifically the B4 dogbone?
Thanks
Can anyone tell me the approx. lengths from eye to eye of these shocks?
Also is it really true that these fit all the following traxxas models - i.e. are the stock shocks of all these models literally identical? Saw this list on an ebay posting....
Last post
Yes, all those cars really use the same length shocks.
The fronts are roughly 3.5 and the rears are 4 .
anyone have the length of the front cva bones? end to end would be awesome, also... if theres a difference in length of the center bones, i could use those two numbers too... and finally, do they differ between the .1 .2 and .3?
Last post
I have some lengths listed in my RC10.44 build thread.
