Found another rc10 for a good deal. Can't pass it up.
Another rc10ce? Still not so familiar with these...
I noticed the gear cover on my other rc10 didn't have the black round piece on it.
Any additional info on this would be great!
Rc10 newbie...
Turbo ultima
Turbo optima project
Srb projects
RC10 CE, oddly though I am guessing it has a B stamp chassis ( with stealth trans holes ) as it has the stealth brace, and the later black plastic ( gen 1 ) caps and the six hole front tower. Looks like you found it in a lake?
Charlie don't surf wrote:RC10 CE, oddly though I am guessing it has a B stamp chassis ( with stealth trans holes ) as it has the stealth brace, and the later black plastic ( gen 1 ) caps and the six hole front tower. Looks like you found it in a lake?
I'll have to check if its a B stamp.. Hmm...
@Rc10resto Looks like it lol...
Rc10 newbie...
Turbo ultima
Turbo optima project
Srb projects
If its unrun, then I would clean it up- the rusted steel is easy enough to deal with. That car has the wrong trans ( like I thought ) it should be a stealth car-
Charlie don't surf wrote:If its unrun, then I would clean it up- the rusted steel is easy enough to deal with. That car has the wrong trans ( like I thought ) it should be a stealth car-
It has been run but not too much i think. a few scratches on the bottom. Most of the other parts looks nice no damage or scratches.
Only the screws are rusty..
Is it a wrong trans?
Now i get confused..Lol...
Rc10 newbie...
Turbo ultima
Turbo optima project
Srb projects
Don the Anodizer sent me a preview of my rims. I've switched track with the carbon fiber and alloy build I posted a while ago. Lets just say this version will be too heavy to get out of its own way.
Last post
Interesting, and well worth it if you ask me. I agree, pay what you need to and get it done right the first time. Nice work.
Has anyone ordered pargu's alloy arm set yet? I just saw them on the bay and I want to see them installed on a car...
Last post
I received something I purchased on eBay a week and a half ago that looks very promising! The seller has BIN's on a pair of arms of about $10, but had one for sale with no start bid, and I won for a buck. It looks like a cinch to install in place of...
Hey guys , i thought you will like to see these arm installed... pretty nice in my opinion, you can order these anodized if you want ,i got the plain ones cuz i like the black/aluminum ''Terminator'' look, currently pargu2000 has two models...
Last post
Looks good, madmaxx, and you've confirmed my doubts about pargu's arms lacking the mounting holes for the stabilizer assemblies. It appears he's seen this oversight and now offers 2 models. He probably should've just drilled 'em from the start so...
I was wondering if anyone had a complete list of the parts (Part#'s would be awsome) that I would need to get the Hydra-drive on my RC10 stealth. MY LHS guy has a bunch of old losi parts. from what I saw he has: Spur gear, friction plate, casing,...
Last post
Wise men with words of wisdom. 8)
To the phonebook I go.
I finally found a great off-brand upgrade for the stock Javelin/Optima/Turbo Optima rear arms. This mod is so cheap it's laughable, and will upgrade your rear control arms, dog-bones, and give you a slightly wider stance all at once.
First, you...
Last post
I don't think the wheelbase (front axle to rear axle) is changed much with this mod; if anything only a few millimeters. The track (left wheel to right wheel total width) is only increased by 10mm approximately, with a particular set of wheels.
A little something new for the venerable SB cars! I am doing an all-Alloy upgrade build on my Scorcher, using my pieces that have been done (But are no longer available) and on this one I took a hard look at wheels. I dawned on me that all previous...
I have these and wondered if these kits would fit a custom build up im working on. Mostly rustler aftermarket parts i think,all the parts have no label except the traxxas bags in multiple boxes i just received 2 days ago.So you guys are more up on...
Last post
Finally took some parts out the bag.Had to use two diff kits to make one complete,dang bags missing bunch small parts.I have a built tranny but its a used case,Still tryn find a new blue annoed GPM trans case and some kinda aluminum chassis to go...
New to the forum. Looking for alloy parts for a 1984 RC10 A stamp frame. Any help will be appreciated.
Last post
Not only are there interchangeable parts, you can still buy many actual Associated parts for the Rc10. They are still in production. You do not want aluminum suspension components on a runner.