I think I read somewhere on here that someone had a B4 top shaft in a RC10 stealth trans, but maybe I miss read it. :?
Is this possible, and if so is this to help with added stress from brushless motors?
Does the B4 top shaft gear have the same...
Last post
Is anyone using the carbon fiber pads from kidsagain, if so how what were the results ?
I just saw that I never responded. It took a while to actually take things apart and hook it up.
The short answer is that it return slipper function to a...
Ok guys, i know i should have tried using the search function but seems like that it is not working in my case. before i search and saw that a top shaft of a B4 is can be use to retro fit a Losi Hydra drive unit to a RC10, im not sure if this is...
Can anyone ID this top shaft in the B3 I'm building? It's aluminum, and there's a stud that threads in for the slipper hardware. I can't seem to find anything online. Thanks in advance.
Last post
Yeah, I've got the manual.
I don't know if I need to change it. It was assembled when I got it, so I'm just going to slap it back together. I was curious if anybody knew what that top shaft was, and if I possibly needed different spacers to shim...
Hello all. I've been doing some casual club racing with my old T3 just to get some extra wheel time. Anyway, I want to put the T4/B4 slipper/top shaft on it.
I've heard you have to shim up the topshaft to make this work.
For those that have done...
Last post
The manuals are on AE's website. Same about of shimming as stock.
I put a MIP top shaft and dual slipper on my T2 without issue.
Have been out of the hobby for about 18 years just now getting back into it.
Looking to swap the top tranny shaft in a B4.2 with a B3 top shaft. Can this be done?
If this can be done I will buy a B4.2
Thanks for any help.
Last post
I did it the other way round so I could run a B3 with a B4 slipper for a brushless setup. It was a straight swap so I can't see why you couldn't do it the other way.....
After some help to save my sanity. I found this Steel topshaft at home and cant work out what its for, The best guess i have is that its an aftermarket B4 top shaft ??? As its the same length also. However, it has a thicker shoulder up to the gear...
Last post
Ignore me, sussed it now....... :)
Wait what was it?
Probably something to do with the machined spacer instead of a bearing surface
i have the b4 top shaft for my stadium truck now my son wants to get the other truck i have going instead of switching tranies does the b4 topshaft fit the stock 10t tranny or just the stealth.
i wonder how hard it would be to mount the b4 tranny it...
Last post
i do have a stealth but i also have 2- 6 gears as well.
i switched the topshaft and the slipper and spur worked great.
with brushless my son cruised it around the track the other day.