Part number help

[surgetek]

Hey fella's

I need help with either finding a part or a replacement.

I want to put the stock RC10 shocks on my restores and when I took apart the shocks some of the nylon washers that sit behind the C clip were bent or trashed.

Anyone know the part number for them? A compatible replacement?

I've searched for them but I haven't come up with anything.

I bought the shock rebuild kit but they are not in there either.

Thanks

Tom

[Phin]

For the bottom load gold shocks you can borrow the plastic washers (and retaining clips) from this Traxxas rebuild kit:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJJ17&P=ML


Then use the AE rebuild kit for the rest of the shock.

[MIKE VALENTINE]

4187 or 6466 of these should work. 4187 are 1/8 id .030 thick nylon washers. 6466 is a kit different thickness washers. take a look on RC10.com web site for those part numbers.

[surgetek]

Thanks guys.

The one from the Traxxas kit looks promising.

I'll look up the others. I have about 8-10 sets of shocks to rebuild.

[surgetek]

I should have broadened my search to spacer

[surgetek]

4187 or 6466 of these should work. 4187 are 1/8 id .030 thick nylon washers. 6466 is a kit different thickness washers. take a look on RC10.com web site for those part numbers.

I went and looked at these today at lunch.

The 4187 is smaller than the one I need I am pretty sure. 6466 is the plastic spacer set that goes on the inner shaft of the shock.

I'll have to keep looking I think or take a look at the Traxxas kit.

[Phin]

Several members have used the Traxxas washers successfully.

[surgetek]

Yeah I'll check them out.

I didn't have the number at the time and this particular shop is set up for online sales so it's just a huge space with lots of drawers of parts. I'd still be there.