She's all done. Mines getting dirty no time for a shelf queen haha!
Very nice.
I am having a problem with my stealth drive and slipper assembly. The slipper, once tightened, is rubbing the motor plate too much and will not function. Did you run into this problem? If so, what did you do about it?
Thanks!
FT RC10B4.2*Dualsky ESC*Reedy 17.5T*XP
RC10 Re-Re*Dualsky ESC*Reedy 17.5T*Savox
RC10 CE*Novak GTB2*Dualsky 13.5T*XP
RC10T and other vintage goodness
Raced it for the first time at our local outdoor club race this past Sunday. Can't believe how hooked up the car was on our track! Was leading the main till I stripped a spur gear. I was one of 3 worlds cars out racing with the modern cars it was a blast.
Tim W. wrote:Raced it for the first time at our local outdoor club race this past Sunday. Can't believe how hooked up the car was on our track! Was leading the main till I stripped a spur gear. I was one of 3 worlds cars out racing with the modern cars it was a blast.
What caused the spur to strip?
You name it - and I want it If it's Old Skool, It's Kool
I think its awesome how good they handle. Just got done with mine and the first time I ran it I was amazed at how it handled. I was thinking when I bought it that I would run it every once in a while but I am definitely going to race it. Yours looks awesome, love the paint job...good job
Hey guys,
this might of been covered already, but I couldn't find it.
I have a Worlds re-release car all built and ready to race, but as my other racer is a B5M, I would love to share wheels and tires, if that's possible
is there a conversion...
Last post
Hi,
Other option is to use NIX63551 arms and B4 bones. This way you can use Worlds Car hubs and bearings from the kit.
In this mod suspension layout isn't Worlds Car anymore as outer hinge pin moves out.
I got my first associated car ever, the RC10 worlds in mid February. I was hooked after a friend of mine Foong, let me drive his, and I was instantly hooked, it was so easy to drive, unlike another buddy's TLR 22. So I bought it , but did not have...
Last post
Our friend Alcyon said he'd go kick modern 2wd butts - I assume he meant at the track.
Paul
I think you are right Paul. I'm looking forward to hearing how Alcyon does at the races. I'm not going to hijack his thread. If I want to discuss setting...
RC10 re release
Hobbywing juststock esc
Reedy 17.5
Savox servo
Team associated 2.2 conversion front and rear
Stealth trans
Jconcepts steering, shock towers, trans brace, and wing buttons
Lunsford turnbuckles
Not sure why I didn't start a build thread soon in the build but never too late. I suppose because I'm not doing too much outside of the box on this one.
Hi guys, I have finally bought a new kit from my local hobby shop today. I have started the build process and immediately ran into a problem with the stealth tranny. The V2 slipper pads are rubbing against the motor plate when tightened down even a...
Last post
the B4 top shaft (which is what you have) has been known to have problems with where they machine the flats. Seems there is quite a variation. There are two options.
first, call associated and let them know, this is well known and they should be...
The RC10 Worlds release had some issues, and I experienced them as well (transmission case, weird idler gear tolerances, and neon nylon-colored materials). However, very few reported my particular issue with the CVD's . I had a glaring issue with my...
Last post
I have about a dozen of the Rere Worlds cars, and I think 6 were built from kits that I myself opened. 2 of those kits had this problem. This seemed to be more of a later production run issue, which is possibly why you didn't hear much about it....