Ko Propo PS-1001FET wiring question

[variant45]

This servo came with some random parts I bought. I have looked a bit and can't find how to wire the extra wire. Does anyone have a wiring diagram for this servo?
Thanks,

Scott

[scr8p]

It would go to a lead on a ko esc.

[integra22t]

ya its to supply extra voltage to the servo .. ive got the speed control for it lol

[variant45]

Thanks for the info guys.

is it just a positive input? 7.2v?

Scott

[limestang]

I believe the wiring is the same as Futaba. The middle wire (blue in this case) is the "+" power wire. Note, the old Airtronics has the power and ground reversed.

- Limestang

[scr8p]

http://www.rc10talk.com/viewtopic.php?f=78&t=30616

[variant45]

Thanks, that's exactly what I needed. I tried a search and should have tri d a broader one.

Scott

[variant45]

I was able to confirm operation of the servo by attaching to a receiver and putting a separate voltage to the blue wire, seems to work great.

So the wires from the servo in the harness are: blue (signal) red (pos) black (neg); and the lone blue wire is for a +7.2v input.

Thanks for the help.

Scott