RC10T3 questions

[RABIDFOX50]

I picked up a T3 recently and it has a blue anodized motor plate, front plate and rear plate. Was this a FT version? Can’t remember. It also has blues turnbuckles, full bearings, graphite arms and CVDs.

[Tamlok]

Most likely, kit #7048 is the Factory Team and came standard with what you have. Here is the Associated link to the manual where you can compare the different kits.
https://www.teamassociated.com/cars_and_trucks/RC10T3/Team/manuals_setups/

[RABIDFOX50]

Yup, that’s the one. Many thanks. I was lucky to get it with a Novak Tempest ESC. The battery leads are buggered up but nothing a good solder job can’t fix. I’ll post some pics soon.

[broodenburg]

biggest difference was that the FT version has graphite arms, chassis, rear tower, front bulkhead and front topplate. These are a bit hard to find nowadays..

Post your pictures!

[RABIDFOX50]

Another question I have is weather the RPM gear cover for the T4 will fit the T3? I heard this was the case but want to confirm this before purchasing the cover.

[Tamlok]

Yes, that cover will fit, I have an Associated B4 gear cover on my B3. Side note though, the cover sticks out more where the slipper adjustment plug is.

[RABIDFOX50]

Awesome, thanks. Shouldn’t be an issue with that portion sticking out further. Thanks again.