Ayk Question ?-

[sk7]

I have been restoring this AyK Buffalo, i have noticed this that no other Ayk ,That I have seen has this front suspension set up this way the upper mouts are set back and longer then the other buggys i have seen with this simular chassis design. Does any body know anything that could shed some light, I was wondering if this was the older version of the buggy. I have attached some pics to help describe what i'm talking about?

[Asso_man!]

I think you mounted the front drive train the wrong way, I have restored a AYK Boxer, which has exactly same chassis, just a different body.

The upper links are supposed to attach in front of the monoshock, not at the rear...

Have a look here: http://www.rc10talk.com/viewtopic.php?f=5&t=3049&start=0

[sk7]

i have noticed that the upper threaded rod that adj.'s the camber is longer on your's and the ball end alum. mounts on your chassis are shorter then mine.

[sk7]

also the front sway bar has is mounted to the shorter mounts in my pictures , as my longer posts are not drilled and tapped to hold the sway bar as the little ones are.