MY RC10 RUNNER- NEW PICS
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
MY RC10 RUNNER- NEW PICS
Ok, this is my first RC10 runner in 12 years, I use to race RC10s in the 90’s and the last runner after my Team car was a B2 and the last truck was a RC10T, like 3 years ago (it’s getting retuned at the moment).
I am currently working on the paint job for this one; it will be a Pro Tech body with a modernized old school paint job (still working on it).
This car has custom crafter G-10 shock towers, Carbon fiber tranny brace and battery strap. I also made the front skid plate. The front shocks are RC10T front with 1 spacer inside and regular rear shocks in the back with 2.5 spacers inside. Some of the updated parts are B4 front steering carriers and axels and the rear CVD axels.
Running this in the patio took me back to the good old racing days and after I get the body painted I am going to the local track to run and probable later, after I get some good batteries, RACE DAY.
Have a good evening people.
Let me know what you think.
I am currently working on the paint job for this one; it will be a Pro Tech body with a modernized old school paint job (still working on it).
This car has custom crafter G-10 shock towers, Carbon fiber tranny brace and battery strap. I also made the front skid plate. The front shocks are RC10T front with 1 spacer inside and regular rear shocks in the back with 2.5 spacers inside. Some of the updated parts are B4 front steering carriers and axels and the rear CVD axels.
Running this in the patio took me back to the good old racing days and after I get the body painted I am going to the local track to run and probable later, after I get some good batteries, RACE DAY.
Have a good evening people.
Let me know what you think.
- Attachments
-
- RC10-RUNNER-01-003.jpg (84.59 KiB) Viewed 5509 times
- RC10-RUNNER-01-003.jpg (84.59 KiB) Viewed 5509 times
-
- RC10-RUNNER-01-007.jpg (103.11 KiB) Viewed 5509 times
- RC10-RUNNER-01-007.jpg (103.11 KiB) Viewed 5509 times
-
- RC10-RUNNER-01-009.jpg (98.33 KiB) Viewed 5504 times
- RC10-RUNNER-01-009.jpg (98.33 KiB) Viewed 5504 times
-
- RC10-RUNNER-01-010.jpg (81.35 KiB) Viewed 5506 times
- RC10-RUNNER-01-010.jpg (81.35 KiB) Viewed 5506 times
-
- RC10-RUNNER-01-011.jpg (98.9 KiB) Viewed 5501 times
- RC10-RUNNER-01-011.jpg (98.9 KiB) Viewed 5501 times
-
- RC10-RUNNER-01-012.jpg (80.83 KiB) Viewed 5497 times
- RC10-RUNNER-01-012.jpg (80.83 KiB) Viewed 5497 times
-
- RC10-RUNNER-01-018.jpg (70.12 KiB) Viewed 5498 times
- RC10-RUNNER-01-018.jpg (70.12 KiB) Viewed 5498 times
-
- RC10-RUNNER-01-019.jpg (51.44 KiB) Viewed 5492 times
- RC10-RUNNER-01-019.jpg (51.44 KiB) Viewed 5492 times
Re: MY RC10 RUNNER
sweet!
Guess the body is going to get siebenelched judging by the gap down the middle of the rear shock tower?
Guess the body is going to get siebenelched judging by the gap down the middle of the rear shock tower?
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER
Thanks guys, the body might be get some siebenelched treatment, but I wont be able to lower it to much because the speed controller need the heat sinks on it will hit the body.
I will work on it during the week and paint the next weekend.
I will work on it during the week and paint the next weekend.
- cyclepsych0
- Approved Member
- Posts: 189
- Joined: Wed Mar 19, 2008 1:21 am
- Location: San Marcos, CA
Re: MY RC10 RUNNER
Sweet lookin' ride you have there!! I've got a similar runner build in the works, but I'm doing the chassis in the same flourecent green as the nose plate. Your pics have me all pumped up to finish it now!
"Relax. Alright? My Old Man is a television repairman....... Got this ultimate set of tools... I can fix it!!" - Spicoli
- Mr. ED
- Approved Member
- Posts: 5477
- Joined: Thu Dec 21, 2006 1:30 am
- Location: Back @ home: Belgium
- Has thanked: 58 times
- Been thanked: 56 times
Re: MY RC10 RUNNER
I like that green accent, maybe you could run a green pin-stripe on the tub sidewalls or top too?
It looks like a potent car with the right mods to modernize it.
I hope you're a better driver than me and'll do well with it at the track.
It looks like a potent car with the right mods to modernize it.
I hope you're a better driver than me and'll do well with it at the track.
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER
QUESTION…
As you see I am running a Novak 410-Hpc with a Orion Core stock motor. I am planning to run GP 3300 6 cells pack. The motor has a lot of punch so what would be a good combination of Spur and pinion for this set up? I am also running a B4 slipper clutch.
The track I will ride is a blue groove short track with some big jumps.
thanks.
As you see I am running a Novak 410-Hpc with a Orion Core stock motor. I am planning to run GP 3300 6 cells pack. The motor has a lot of punch so what would be a good combination of Spur and pinion for this set up? I am also running a B4 slipper clutch.
The track I will ride is a blue groove short track with some big jumps.
thanks.
- call-911
- Approved Member
- Posts: 553
- Joined: Thu Mar 27, 2008 12:32 am
- Location: Mokena, IL USA
- Has thanked: 1 time
Re: MY RC10 RUNNER
VERY nicely done. I hope to get one of these wrecks I got off of ebay to that spec. Love it!
Keith C
- carloco8
- Super Member
- Posts: 629
- Joined: Sun Jun 04, 2006 2:02 pm
- Location: SoCal
- Has thanked: 10 times
- Been thanked: 27 times
Re: MY RC10 RUNNER
I love the 410 HPc. The best speedo I've ever used that doesn't have one-touch setup. With 3300's (and higher) along a brushed motor, I'd start with 81/19 or around a 9.5 final ratio and go up or down a tooth depending on how the car feels.
Old school racing all the way!
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER
Thanks for the info… this is an update on the body. I am planning to finish the paint this weekend so I will post pics next week…
Later…
Later…
- Attachments
-
- RC10-RUNNER-01-x03.jpg (103.43 KiB) Viewed 5118 times
- RC10-RUNNER-01-x03.jpg (103.43 KiB) Viewed 5118 times
-
- RC10-RUNNER-01-x02.jpg (131.44 KiB) Viewed 5117 times
- RC10-RUNNER-01-x02.jpg (131.44 KiB) Viewed 5117 times
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER- new skin
Still working on the decals…
- Attachments
-
- 2008-05--ProTech-01.jpg (56.16 KiB) Viewed 4843 times
- 2008-05--ProTech-01.jpg (56.16 KiB) Viewed 4843 times
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER- NEW PICS
I took some good pics of my runner (I am waiting for some more decals I ordered to finish the body). I haven’t run it at the track but I will in the next couple of weeks because I have bean busy with work. It looks pretty good hope it performs the same way.
Hope you like the pics.
Hope you like the pics.
- Attachments
-
- RC10-RUNNER-01-023.jpg (90.05 KiB) Viewed 4685 times
- RC10-RUNNER-01-023.jpg (90.05 KiB) Viewed 4685 times
-
- RC10-RUNNER-01-022.jpg (93.2 KiB) Viewed 4679 times
- RC10-RUNNER-01-022.jpg (93.2 KiB) Viewed 4679 times
-
- RC10-RUNNER-01-021.jpg (100.14 KiB) Viewed 4678 times
- RC10-RUNNER-01-021.jpg (100.14 KiB) Viewed 4678 times
-
- RC10-RUNNER-01-020.jpg (213.76 KiB) Viewed 4674 times
- RC10-RUNNER-01-020.jpg (213.76 KiB) Viewed 4674 times
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: MY RC10 RUNNER- more new PICS
These are large pics for al you pic lovers like me. Hope you like them.
- Attachments
-
- RC10-RUNNER-005.jpg (198.07 KiB) Viewed 4414 times
- RC10-RUNNER-005.jpg (198.07 KiB) Viewed 4414 times
-
- RC10-RUNNER-004.jpg (140.22 KiB) Viewed 4405 times
- RC10-RUNNER-004.jpg (140.22 KiB) Viewed 4405 times
-
- RC10-RUNNER-003.jpg (129.64 KiB) Viewed 4405 times
- RC10-RUNNER-003.jpg (129.64 KiB) Viewed 4405 times
-
- RC10-RUNNER-002.jpg (223.04 KiB) Viewed 4403 times
- RC10-RUNNER-002.jpg (223.04 KiB) Viewed 4403 times
-
- RC10-RUNNER-001.jpg (215.93 KiB) Viewed 4402 times
- RC10-RUNNER-001.jpg (215.93 KiB) Viewed 4402 times
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 1527 Views
-
Last post by Kayne
-
- 7 Replies
- 1151 Views
-
Last post by Mad Racer
-
- 1 Replies
- 559 Views
-
Last post by blown5.0
-
- 3 Replies
- 1242 Views
-
Last post by toolman72
-
- 18 Replies
- 2373 Views
-
Last post by gmc572
-
- 15 Replies
- 2720 Views
-
Last post by Hangtime
-
- 63 Replies
- 8427 Views
-
Last post by knucklebuster
-
- 25 Replies
- 2770 Views
-
Last post by Tadracket
Who is online
Users browsing this forum: Amazon [Bot] and 62 guests