are hinge pins still available???

[PBR Allstar]

I searched the site a bit but didn't find much. I was wondering if stock RC10 hinge pins are available still? I looked on the tower site but didn't find much too explanitory? Any help with part no's or sources would be much appreciated. I just got a set of 6380 which are labled as rear inners but they seem way too long.

thanks.

[blown5.0]

Lunsford still makes them for the 10t/gt, not sure if they would work for the rc10.

[templeofspeed]

This may be helpful:

http://aedownloads.com/downloads/catalogs/cat_rc10.pdf

The 6380 pins are buggy rear inner, but the rear arms got changed to use the shorter 7356 truck hinge pin in 1993. The RPM buggy rear arms still use the 6380.

I think the only discontinued pin is the 6226 buggy front inner.

[scr8p]

you can use these from rc4less......

http://rc4less.com/Front_Springs_&_Front_End_Parts/c22/p245/Long_King_Pins_(1_pair)_Pick_your_length/product_info.html

1.500 - inner front
1.375 - outer rear
1.195 - outer front

or the stock ones that are still available (for now).........

king pins - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2526&P=SM
front outer - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2528&P=SM
rear inner (long) - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2565&P=SM
rear inner (short) - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2936&P=SM
rear outer - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2566&P=SM

[PBR Allstar]

thanks temple and scrape, that's exactally what I was hoping for!!!!