RC10Talk - The Net's Largest Vintage R/C Community

if the spring is not broken you can rewind it. This may work also.
https://www.horizonhobby.com/product/pull-starter-complete12s12spd15s/DYN6535.html

I could be wrong but they look like 1/16 " spacers. Can be used for down stops and also for adjusting the rear hub carrier.

I use a Roll Pin starter punch and finish with a Roll Pin punch. The Roll Pin starter punch is hollow and holds the Roll Pin to just get it started into the axle.

I could be wrong but it looks like in the picture servo or double sided tape was used. I really like your build and attention to detail.

I throw everything at it. Hobby knife with new #11 blade, Body scissors, Dremel with drum sander, Body reamer, Sand paper for edges. It all looks easy on the You Tube 101 classes but I couldn't score a straight line to save my ass let alone wheel wells. I usually cut the bodies out before painting a...

Losi XXXT CR.

Team Associated RC10B3.

2005 Top Force. Built from NIB kit. Had to replace the right rear axle as that part had come from the factory not threaded.

New axle arrived today. Top force is now complete. On to the next problem.

I think the thread pitch is .70 . My tap and die set doesn't go down to M4 and the cost of the axles compared to a M4 die is about the same price so I just got the axles.

Tamiya should have included a M4 die in the tool bag and called it a one of one limited edition kit. I did how ever gain another box wrench that I don't need.

Thank you for the info I will get one from Amain.

Yes just the axle. I'm not familiar with tamiya parts . rcmart says TG10 axle # 50823 fits. Amain has one but the part number is 50808. https://www.amainhobbies.com/tamiya-tg10-rear-wheel-axle-tam50808/p124214 https://www.rcmart.com/tamiya-tg10-wheel-axle-2-pcs-silver-50823-00081777?search=top%20for...

I have a axle set ordered from rcMart should be here in a few months. In the mean time why not a zip tie to hold things in place.