RC10Talk - The Net's Largest Vintage R/C Community

oh the 10 t isnt nothing, you should see my t3 that i had built, i also have a t2 that i whipped back into shape, the t2 is my fastest rc car i have, it has a havoc 8.5 brushless system in it. i cant keep the front wheels on the ground lol. the 10t chassis i bought off a friend that is a builder.i b...

she doesnt race it, her daughter (my step-daughter) races it. she races it in the novice class in our racing club we have here locally.

i think i have it http://i1112.photobucket.com/albums/k484/Jim_Walker/rc%20cars/206.jpg http://i1112.photobucket.com/albums/k484/Jim_Walker/rc%20cars/202.jpg http://i1112.photobucket.com/albums/k484/Jim_Walker/rc%20cars/203.jpg http://i1112.photobucket.com/albums/k484/Jim_Walker/rc%20cars/204.jpg ht...

not sure how to upload pics on here...lol

heres my wife's 10t

not a bad 10 t, a little cleaning and she should be good to go with a little electronics it should scoot around that track pretty good with that 2.65 conversion trans.... i'll have to post pics of my wife's 10 t i had built a few yrs back

it also depends on if you have the original arms or rpm arms on your 10 also if you have the updated arms you might get by by buying cvds for the t2/t3 and if you have the 3/16 axles or the 1/4. so yeah the other gentleman is correct when it comes to modding your 10...

and yes you can use the mounts, just use a .030 shim washer and that should give you the squat you need

you can always build yourself a shelf out of either carbon fiber or thin aluminum to set your esc on so everything fits just drill the shock tower and tap the holes for either 440 or 540 screws. sorry about the other post just skipped through and seen the rear arm mounts.

some of the parts from the rc10gt will fit the t, but most of the parts from the gt will fit the rc10t2, the rear arm mounts as far as i know(like you have pictured from everything rc) wont fit as far as i know because the holes do not lineup like they are supposed to. i have a set of those rear arm...

after you cut that hole you shouldnt have to shim anyhting cause the trans will set almost perfect , but a builder friend of mine has already put a 240 trans in a dual sport, it turned out really nice, and he even used the stock bulkhead and shock tower, but as far as shimming the rear arm mounts,yo...

have you tried www.rcboyz.com?

we have those breaking alot out here in the midwest also, id also try t3 arms if ya can get them.

i have a converted rc 10 to a rc10t, i used t3 axles on the rear and they have worked fine, in fact i have a "hines 57" rc10 t

oops read that wrong, my first set was futaba, in fact i still own my first controller and reciever a magnum jr, i own 4 of them